Audio
Frequency range:The lowest and the hightest frequencies that can be inputted/produced.
80 - 22000 Hz
RMS rated power:RMS (Root mean square) is a measure of the continuous power required by a device, in particular audio amplfiers and loudspeakers.
50 W
RMS power output per channel (8 Ohm):
25 W
Signal-to-Noise Ratio (SNR):This is the ratio of signal intensity to noise intensity.
98 dB
Total Harmonic Distortion (THD):Total harmonic distortion is a measure of non-linear harmonic\n\ndistortion and is given in %. Non-linear harmonic distortions are\n\nsignals which were not present in the original before the signal was\n\nconverted by the headphones. These unwanted signals are caused by the\n\ndiaphragm, whose movements do not precisely move in time with the\n\nelectric signals that cause it to move. Unfortunately, this is a\n\nfeature of all electroacoustic transducers. Although it cannot be\n\ncompletely eliminated, suitable steps can be taken to minimise it.\n\nHowever, the user is not interested in why this distortion takes place\n\nbut in how great the level of distortion must be for it to become\n\nperceptible. According to the findings of several research projects, a\n\ntotal harmonic distortion of 1% in the frequency range of 100 to 2000\n\nHz is imperceptible. Below 100 Hz, the perceptibility threshold lies\n\nat 10%.
1%
Amplifier class:An electronic amplifier, amplifier, or (informally) amp is an electronic device that increases the power of a signal. It does this by taking energy from a power supply and controlling the output to match the input signal shape but with a larger amplitude. Power amplifier circuits (output stages) are classified as A, B, A/B and C for analog designs, and class D and E for switching designs based on the proportion of each input cycle (conduction angle), during which an amplifying device is passing current.
D
Peak power per channel:The maximum power (usually measued in watts) that can be transmitted through a channel.
25 W
Audio output channels:An audio output channel is an electric circuit which acts as a path for a signal produced by a device. A device may have several audio output channels.
2.0 channels
Certificates
Certification:
WEEE, CE/EMC, C-TICK, FCC, IC
Packaging data
Package weight:Weight of the packaged product.
1.1 kg
Package dimensions (WxDxH):Dimensions of the packaged product (Width x Depth x Height).
240 x 205 x 63 mm
Ports & interfaces
DC-in jack:The socket/plug where the DC electricity supply connects to the device.
Power
Power consumption (typical):Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.
50 W
AC input frequency:
50 - 60 Hz
AC input voltage:The voltage of the AC electricity that is inpitted into the product.
100-240 V
Technical details
Compliance certificates:
RoHS
Sustainability certificates:
RoHS
Connectivity technology:
Wired
Purpose:What the product is used for.
Home
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
630 g
Height:The measurement of the product from head to foot or from base to top.
64 mm
Depth:The distance from the front to the back of something.
36 mm
Width:The measurement or extent of something from side to side.
42 mm
