Battery
Battery recharge time:Approximate time required to recharge the battery from completely empty to completely full
2 h
Fast charging time:
15 min
Talk time:The total time a battery can power a device for calls. As the device drains the battery during a call, the talktime left in the battery is diminished until the device is turned off or the battery recharged. The longer the talktime the less frequently you will need to recharge. Talktime, expressed in hours and minutes, is much shorter than standby time because transmission requires more power.
6 h
Continuous audio playback time (with charging case):
18 h
Talk time (with charging case):
18 h
Continuous audio playback time:Number of hours on average for continuous play. This is dependent on the device battery capacity.
6 h
Battery technology:The type of battery in the device, e.g. nickel–cadmium (NiCd).
Lithium Polymer (LiPo)
Battery type:Description of battery supplied with the product, such battery form factor (e.g. AA/AAA).
Built-in battery
Headphones
Headphone sensitivity:
104 dB
Impedance:The effective resistance of an electric circuit or component to alternating current, arising from the combined effects of ohmic resistance and reactance.
28 O
Headphone frequency:The range of frequencies (low to high sounds) that the headphones can produce.
20 - 20000 Hz
Ear coupling:Ear coupling describes the way in which headphones or earphones stay attached to, or inside, the ear. There are three common types of ear coupling: circumaural, supra-aural and intra-aural. Circumaural headphones enclose your ears with large pads that suppress external noise. Supra-aural headphones are typically more lightweight and sit on top of the ears with small pads. Intra-aural headphones come in two basic designs and neither style sits on the head itself. The first are ear buds, which sit just outside of the ear canal, on top of your ear lobes. The second type is actually inserted directly into the ear canal and offers some external noise suppression.
Intraaural
Maximum input power:The maximum power that can be inputted into the device.
5 mW
Logistics data
Products per shipping (inner) case:
3 pc(s)
Shipping (inner) case gross weight:
165 g
Shipping (inner) case height:
11 cm
Shipping (inner) case length:
16 cm
Shipping (inner) case width:
13 cm
Products per master (outer) case:
24 pc(s)
Master (outer) case gross weight:
4.22 kg
Master (outer) case height:
250 mm
Master (outer) case length:
338 mm
Master (outer) case width:
278 mm
Harmonized System (HS) code:
85183000
Microphone
Packaging content
Cables included:
USB Type-C
Carrying case:A case in which the product can be carried.
Packaging data
Package weight:Weight of the packaged product.
128 g
Package height:The distance from the top to the bottom of the packaging.
172 mm
Package depth:The distance from the front to the back of the packaging.
40 mm
Package width:The distance from one side of the packaging to the other.
95 mm
Performance
International Protection (IP) code:The IP code classifies and rates the degree of protection provided against the intrusion (including body parts such as hands and fingers), dust, accidental contact, and water by mechanical casings and electrical enclosures. It is published by the International Electrotechnical Commission (IEC). The digits (characteristic numerals) indicate conformity with the conditions summarized in the tables below. Where there is no protection rating with regard to one of the criteria, the digit is replaced with the letter X. an electrical socket rated IP22 is protected against insertion of fingers and will not be damaged or become unsafe during a specified test in which it is exposed to vertically or nearly vertically dripping water. Another example is the Sony Xperia Z Ultra, one of the first cellular phones to be IP-rated; it is rated at IP58 and marketed as "dust resistant" and can be "immersed in 1.5 meter of freshwater for up to 30 minutes".
IPX4
Protection features:Physical effects from which the product is protected e.g. water resistant, crash proof.
Splash proof, Sweat resistant
Operating keys:
Answer/end call, Play/Pause, Reject call
Headset type:A headset is headphones combined with a microphone, or one headphone with a microphone. Headsets provide the equivalent functionality of a telephone handset but with hands-free operation. Types of headsets include single earpiece (monaural) and double earpiece.
Binaural
Recommended usage:What the product should be used for, and how it should be used (e.g. ambient temperature).
Calls/Music
Wearing style:The way in which the device is worn.
In-ear
Product type:The sub-category of the product.
Headset
Ports & interfaces
Bluetooth profiles:
A2DP, AVRCP, HSP, SBC
Bluetooth version:The type of bluetooth technology in the product e.g. Bluetooth Smart (v4.0).
5.0
Bluetooth:Bluetooth is a low-power radio technology developed to replace the cables and wires currently used to link or connect electronic devices such as personal computers, printers, and a wide variety of handheld devices including mobile phones. Because it uses radio-wave connectivity, a Bluetooth-enabled device has a constant, established connection to whatever browser it uses. This saves the user the trouble of logging on to check for emails or news updates, for example.
Connectivity technology:
Wireless
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
36 g
Height:The measurement of the product from head to foot or from base to top.
45.8 mm
Depth:The distance from the front to the back of something.
28.9 mm
Width:The measurement or extent of something from side to side.
59.6 mm