Battery
Battery recharge time:Approximate time required to recharge the battery from completely empty to completely full
3 h
Typical backup time at half load:The amount of time that a backup energy source (e.g. UPS - Uninterruptible Power Source) can power the device for, when the backup energy source is half-loaded (50% of capacity).
18.6 min
Typical backup time at full load:The amount of time that a backup energy source (e.g. UPS - Uninterruptible Power Source) can power the device for, when the backup energy source is fully loaded (100% of capacity).
6 min
Number of batteries supported:The number of batteries that can be used with the product.
1
Battery technology:The type of battery in the device, e.g. nickel–cadmium (NiCd).
Sealed Lead Acid (VRLA)
Design
LED indicators:
Fault, Power, Status
Display type:Type of display (screen) e.g. LCD.
LCD
Control type:The way in which the device is controlled.
Buttons
Cooling type:The method used to cool the device or to cool the air around the device.
Active
Cable length:How long the cable is.
3.05 m
Rack capacity:The spase that device fill in rack.
2U
Form factor:The shape or design of the product.
Rackmount/Tower
Features
Country of origin:Country where the device is made.
China
Audible alarm modes:
Alarm when on battery, Fault, Low battery alarm, Overload alarm
Management protocols:
SNMP/HTTP
Audible alarm(s):Alarms that make a sound when they are activated (set off).
Power protection features:Features that protect the device against power problems e.g. overload.
Overload
Surge protection features:
Network
Noise level:The amplitude level of the undesired background noise, usually measured in decibels (db).
52.5 dB
Emergency Power Off (EPO):
Power Factor Correction (PFC) type:
Active
Number of output phases:
1
Heat dissipation:The heat generated by the power supply.
75.1 BTU/h
Response time:The response time is the time difference between the moment that a source (for example a video card) sends a signal and that equipment (for example a monitor) receives or display the signal. (Used abbreviations: R/F = Rise and Fall.)
4 ms
Surge energy rating:A surge protector is an appliance designed to protect electrical devices from voltage spikes. A surge protector attempts to limit the voltage supplied to an electric device by either blocking or by shorting to ground any unwanted voltages above a safe threshold. The surge energy rating is a measure of how much energy a surge protector can theoretically absorb in a single event, without failure.
2430 J
Maximum current:The greatest possible amount of current, which is a quantity representing the rate of flow of electric charge.
10 A
Automatic Voltage Regulation (AVR):
Output frequency:
50/60 Hz
Output operation voltage (max):The maximum output voltage produced by the device.
240 V
Output operation voltage (min):The minumum voltage produced by the device during operation.
220 V
Input frequency:The frequency (Hz) which is required to power the product.
50/60 Hz
Input operation voltage (max):The maximum input voltage supported by the device.
288 V
Input operation voltage (min):The minumum voltage needed by the device during operation.
159 V
Output power:The power that the device can produce.
1500 W
Output power capacity:The maximum power that the device can produce.
1.5 kVA
UPS topology:
Line-Interactive
Logistics data
Harmonized System (HS) code:
8504408590
Operational conditions
Non-operating altitude:
0 - 15000 m
Operating altitude:
0 - 3000 m
Storage relative humidity (H-H):
0 - 95%
Operating relative humidity (H-H):
0 - 95%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-15 - 45 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 40 °C
Other features
Battery type:Description of battery supplied with the product, such battery form factor (e.g. AA/AAA).
RBP0129
Packaging data
Cables included:
Serial, USB cable
Ports & interfaces
Emergency Power Off (EPO) connector:
Ethernet LAN (RJ-45) ports:Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device. Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.
2
RS-232 ports:The number of sockets (ports) for RS-232. An RS-232 serial port was once a standard feature of a personal computer, used for connections to modems, printers, mice, data storage, uninterruptible power supplies, and other peripheral devices. Now it has been largely replaced by USB and other ports.
1
Serial ports quantity:The number of serial ports in a computer or peripheral. A serial port is a serial communication physical interface through which information transfers in or out one bit at a time. The term "serial port" usually identifies hardware more or less compliant to the RS-232 standard, intended to interface with a modem or with a similar communication device. In modern computers and peripherals, serial ports have largely been replaced by USBs and other interfaces.
1
Serial interface type:
RS-232
USB 2.0 ports quantity:Number of USB 2.0 ports (connecting interfaces) in the device. USB 2.0 was released in April 2000 (now called "Hi-Speed"), adding higher maximum signaling rate of 480 Mbit/s (effective throughput up to 35 MB/s or 280 Mbit/s), USB 2.0 ports are usually black.
1
USB port:Universal Serial Bus (USB) is an industry standard developed in the mid-1990s that defines the cables, connectors and communications protocols used in a bus for connection, communication, and power supply between computers and electronic devices. USB was designed to standardize the connection of computer peripherals (including keyboards, pointing devices, digital cameras, printers, portable media players, disk drives and network adapters) to personal computers, both to communicate and to supply electric power. It has become commonplace on other devices, such as smartphones, PDAs and video game consoles. USB has effectively replaced a variety of earlier interfaces, such as serial and parallel ports, as well as separate power chargers for portable devices.
AC outlets quantity:The number of sockets in the device where AC electrical power can be connected.
10 AC outlet(s)
Power plug:A power plug is a 2 or 3 pinned device that is placed into an electrical socket in order to make an electrical connection.
C14 coupler
AC outlet types:The type of outlet for AC electricity.
C13 coupler
Technical details
Sustainability certificates:
RoHS
Sustainability compliance:
Warranty period:
3 year(s)
Weight & dimensions
Package weight:Weight of the packaged product.
31.2 kg
Package height:The distance from the top to the bottom of the packaging.
275 mm
Package depth:The distance from the front to the back of the packaging.
530 mm
Package width:The distance from one side of the packaging to the other.
560 mm
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
29.4 kg
Height:The measurement of the product from head to foot or from base to top.
86.5 mm
Depth:The distance from the front to the back of something.
412 mm
Width:The measurement or extent of something from side to side.
433 mm