Design
Number of fans:The quantity of fans (apparatus with rotating blades that creates a current of air for cooling or ventilation).
1 fan(s)
Fan diameter:The size of the fan, measured by the distance from one side of the fan to the other, via a straight line going through the middle of the fan.
12 cm
Cooling type:The method used to cool the device or to cool the air around the device.
Active
General
Type:Characteristics of the device.
Power Supply Units
Logistics data
Harmonized System (HS) code:
84733020
Operational conditions
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 50 °C
Other features
Noise level (full-load mode, 100%):
23.4 dB
Noise level (quiet mode, 50%):
17.9 dB
Performance
Certification:
ErP 2014 Lot 3, TUV, CE, CCC, EAC, RCM, cTUVus, FCC, BSMI
Mean time between failures (MTBF):Statistical model used to indicate product/mechanism reliability; expressed in hours and percentage of duty cycle. This number (in hours) does not indicate the mean time before failure for a single unit/mechanism.
100000 h
Noise level:The amplitude level of the undesired background noise, usually measured in decibels (db).
23.4 dB
ATX version:ATX (Advanced Technology eXtended) is a motherboard form factor specification developed by Intel in 1995. The specification defines the key mechanical dimensions, mounting point, I/O panel, power and connector interfaces between a computer case, a motherboard and a power supply. There are many versions of ATX including ATX12V 1.x and ATX12V v2.3.
2.41
80 PLUS certification:
80 PLUS Gold
Power supply unit (PSU) form factor:
ATX
Purpose:What the product is used for.
PC
Ports & interfaces
Cabling type:
Fully-Modular
ATX Power connector (24-pin):
PCI Express power connectors (6+2 pin):
4
EPS power connector (4+4 pin):
EPS power connector (8-pin):
Peripheral (Molex) power connectors (4-pin):White 4-pinned connector used to connect a peripheral to the power supply.
4
Number of SATA power connectors:
8
Motherboard power connector:The way in which the motherboard is connected to the power supply.
24-pin ATX
Power
Power protection features:Features that protect the device against power problems e.g. overload.
Over current, Over power, Over voltage, Overheating, Short circuit, Under voltage
Power Good signal delay range:
100 - 500 ms
Max output current (+5Vsb):
3 A
Max output current (-12V):
0.3 A
Max output current (+5V):
20 A
Max output current (+12V):
54.1 A
Max output current (+3.3V):
20 A
Combined power (+5Vsb):
15 W
Combined power (-12V):
3.6 W
Combined power (+5V):
100 W
Combined power (+12V):
649.2 W
Combined power (+3.3V):
100 W
Power Factor Correction (PFC) type:
Active
AC input frequency:
47 - 63 Hz
AC input voltage:The voltage of the AC electricity that is inpitted into the product.
90 - 264 V
Total power:The total power that is needed by the device, or the total power produced by the device.
650 W
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
2.17 kg
Height:The measurement of the product from head to foot or from base to top.
86 mm
Depth:The distance from the front to the back of something.
160 mm
Width:The measurement or extent of something from side to side.
150 mm
