Certificates
Certification:
CE, TÃœV, EAC, RCM, WEEE
RoHS compliance:The Restriction of Hazardous Substances (RoHS) Directive aims to restrict certain dangerous substances commonly used in electrical and electronic equipment. Any RoHS compliant product is tested for the presence of Lead (Pb), Cadmium (Cd), Mercury (Hg), Hexavalent chromium (Hex-Cr), Polybrominated biphenyls (PBB), and Polybrominated diphenyl ethers (PBDE). PBB and PBDE are flame retardants used in several plastics. For Cadmium and Hexavalent chromium, there must be less than 0.01% of the substance by weight at raw homogeneous materials level. For Lead, PBB, and PBDE, there must be no more than 0.1% of the material, when calculated by weight at raw homogeneous materials. Any RoHS compliant component must have 100 ppm or less of mercury and the mercury must not have been intentionally added to the component. In the EU, some military and medical equipment are exempt from RoHS compliance.
80 PLUS certification:
80 PLUS Platinum
Cooling
Cooling type:The method used to cool the device or to cool the air around the device.
Active
Number of fans:The quantity of fans (apparatus with rotating blades that creates a current of air for cooling or ventilation).
1 fan(s)
Fan diameter:The size of the fan, measured by the distance from one side of the fan to the other, via a straight line going through the middle of the fan.
13.5 cm
Design
Operational conditions
Storage relative humidity (H-H):
0 - 95%
Operating relative humidity (H-H):
0 - 85%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 70 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 40 °C
Packaging content
Packaging data
Package type:The type of product package e.g. box.
Box
Performance
Mean time between failures (MTBF):Statistical model used to indicate product/mechanism reliability; expressed in hours and percentage of duty cycle. This number (in hours) does not indicate the mean time before failure for a single unit/mechanism.
100000 h
On/off switch:The button which is pressed to switch the device on or off.
ATX version:ATX (Advanced Technology eXtended) is a motherboard form factor specification developed by Intel in 1995. The specification defines the key mechanical dimensions, mounting point, I/O panel, power and connector interfaces between a computer case, a motherboard and a power supply. There are many versions of ATX including ATX12V 1.x and ATX12V v2.3.
2.4
Power supply unit (PSU) form factor:
ATX
Purpose:What the product is used for.
PC
Ports & interfaces
PCI Express power cable length:
50 cm
PCI Express power connectors (6+2 pin):
2
Peripheral (Molex) power cable length:
450,600,750,900 mm
Peripheral (Molex) power connectors (4-pin):White 4-pinned connector used to connect a peripheral to the power supply.
4
SATA power cable length:
450,600,750,900 mm
Number of SATA power connectors:
4
Motherboard power cable length:
65 cm
Motherboard power connector:The way in which the motherboard is connected to the power supply.
20+4 pin ATX
Power
Power protection features:Features that protect the device against power problems e.g. overload.
Over current,Over power,Over voltage,Overheating,Short circuit,Under voltage
Max output current (+5Vsb):
4 A
Max output current (-12V):
0.5 A
Max output current (+5V):
25 A
Max output current (+12V3):
30 A
Max output current (+12V4):
30 A
Max output current (+12V2):
20 A
Max output current (+12V1):
20 A
Max output current (+3.3V):
25 A
Combined power (+5Vsb):
20 W
Combined power (-12V):
6 W
Combined power (+5V):
140 W
Combined power (+12V):
1692 W
Combined power (+3.3V):
140 W
AC input frequency:
50-60 Hz
AC input voltage:The voltage of the AC electricity that is inpitted into the product.
220-240 V
Peak power:This is the maximum power required by the device or peak music power.
1800 W
Total power:The total power that is needed by the device, or the total power produced by the device.
1700 W
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
2.25 kg
Height:The measurement of the product from head to foot or from base to top.
86 mm
Depth:The distance from the front to the back of something.
180 mm
Width:The measurement or extent of something from side to side.
150 mm
