Design
On/off switch:The button which is pressed to switch the device on or off.
Number of fans:The quantity of fans (apparatus with rotating blades that creates a current of air for cooling or ventilation).
1 fan(s)
Fan diameter:The size of the fan, measured by the distance from one side of the fan to the other, via a straight line going through the middle of the fan.
12 cm
Cooling type:The method used to cool the device or to cool the air around the device.
Active
Operational conditions
Storage relative humidity (H-H):
0 - 95%
Operating relative humidity (H-H):
0 - 90%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-20 - 70 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 40 °C
Other features
Noise level (full-load mode, 100%):
19.2 dB
Noise level (quiet mode, 50%):
9.8 dB
Noise level (silent mode, <30%):
8.7 dB
Packaging data
Package weight:Weight of the packaged product.
2.1 kg
Package height:The distance from the top to the bottom of the packaging.
97 mm
Package depth:The distance from the front to the back of the packaging.
268 mm
Package width:The distance from one side of the packaging to the other.
195 mm
Manual languages:
German, English, Spanish, French, Polish, Russian
Performance
Country of origin:Country where the device is made.
Germany
Certification:
CB, TÃœV, cRUus, cTUVus, RCM (Australia), BSMI, CU (Russia)
Mean time between failures (MTBF):Statistical model used to indicate product/mechanism reliability; expressed in hours and percentage of duty cycle. This number (in hours) does not indicate the mean time before failure for a single unit/mechanism.
100000 h
Bearing technology:
Sleeve
Noise level:The amplitude level of the undesired background noise, usually measured in decibels (db).
19.2 dB
ATX version:ATX (Advanced Technology eXtended) is a motherboard form factor specification developed by Intel in 1995. The specification defines the key mechanical dimensions, mounting point, I/O panel, power and connector interfaces between a computer case, a motherboard and a power supply. There are many versions of ATX including ATX12V 1.x and ATX12V v2.3.
2.52
80 PLUS certification:
80 PLUS Bronze
Power supply unit (PSU) form factor:
ATX
Purpose:What the product is used for.
PC
Ports & interfaces
ATX power connector (20+4 pin):
CPU power cable length:
60 cm
CPU power connector (4+4 pin):
PCI Express power cable length:
65 cm
PCI Express power connectors (6+2 pin):
2
Peripheral (Molex) power cable length:
790 mm
Peripheral (Molex) power connectors (4-pin):White 4-pinned connector used to connect a peripheral to the power supply.
1
SATA power cable length:
450,550,570,670,690,790 mm
Number of PATA power connectors:
1
Number of SATA power connectors:
5
Motherboard power cable length:
55 cm
Motherboard power connector:The way in which the motherboard is connected to the power supply.
20+4 pin ATX
Power
Power protection features:Features that protect the device against power problems e.g. overload.
Over current, Over power, Over voltage, Overheating, Short circuit, Under voltage
Power Good signal delay range:
100 - 150 ms
Max output current (+5Vsb):
3 A
Max output current (-12V):
0.3 A
Max output current (+5V):
20 A
Max output current (+12V):
37.5 A
Max output current (+3.3V):
20 A
Combined power (+5Vsb):
15 W
Combined power (-12V):
3.6 W
Combined power (+5V):
100 W
Combined power (+12V):
450 W
Combined power (+3.3V):
100 W
Power Factor Correction (PFC) type:
Active
AC input voltage:The voltage of the AC electricity that is inpitted into the product.
200 - 240 V
Total power:The total power that is needed by the device, or the total power produced by the device.
450 W
Technical details
Compliance certificates:
CCC, CE, Federal Communications Commission (FCC), RoHS, WEEE
Sustainability certificates:
ENERGY STAR, ErP
Warranty period:
5 year(s)
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
1.74 kg
Height:The measurement of the product from head to foot or from base to top.
150 mm
Depth:The distance from the front to the back of something.
86 mm
Width:The measurement or extent of something from side to side.
140 mm
