Design
Certification:
CE, UL60950-1, EN60950-1, FCC Class A, EN55022 Class A, CISPR 22 Class A, C-TICK, VCCI
Internal:The product is built in.
Logistics data
Harmonized System (HS) code:
85176990
Management features
Plug and Play:Indicates whether this product supports is "plug and play". Plug and play is hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.
Network
Duplex system:A duplex communication system is a point-to-point system composed of two connected parties or devices that can communicate with one another in both directions, simultaneously.
Full
VLAN support:A Virtual Local Area Network (VLAN) consists of a group of computers and switches that can be physically distributed over different networks and buildings, but form one LAN on a logical level.
Fiber ethernet cabling technology:
1000BASE-SX
Ethernet LAN data rates:The different speed levels of the Ethernet LAN connection.
10,100,1000 Mbit/s
Ethernet interface type:
Gigabit Ethernet
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.1Q
Converter output interface:
1000Base-SX
Converter input interface:A convertor changes one form of signal into another e.g. A/D Converter changes a signal from analog to digital. A convertor input interface is the place where a convertor connects to the product in order to input the converted signal.
10Base-T, 100Base-T, 1000Base-T
Maximum data transfer rate:
1000 Mbit/s
Networking
Duplex system:A duplex communication system is a point-to-point system composed of two connected parties or devices that can communicate with one another in both directions, simultaneously.
Full
VLAN support:A Virtual Local Area Network (VLAN) consists of a group of computers and switches that can be physically distributed over different networks and buildings, but form one LAN on a logical level.
Fiber ethernet cabling technology:
1000BASE-SX
Ethernet LAN data rates:The different speed levels of the Ethernet LAN connection.
10,100,1000 Mbit/s
Ethernet interface type:
Gigabit Ethernet
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.1Q
Converter output interface:
1000Base-SX
Converter input interface:A convertor changes one form of signal into another e.g. A/D Converter changes a signal from analog to digital. A convertor input interface is the place where a convertor connects to the product in order to input the converted signal.
10Base-T, 100Base-T, 1000Base-T
Maximum data transfer rate:
1000 Mbit/s
Operational conditions
Operating altitude:
0 - 3048 m
Storage relative humidity (H-H):
5 - 95%
Operating relative humidity (H-H):
5 - 95%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-30 - 70 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 50 °C
Packaging content
Quick installation guide:
Performance
Fiber mode structure:
Multi-mode
Wavelength:The distance over which a wave repeats itself. The wavelength determines the characteristics of the wave e.g. red light has a different wavelength to blue light.
850 nm
Maximum transfer distance:The greatest distance over which the data/signal can be transferred.
500 m
Ports & interfaces
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
SC
Fiber ports quantity:The number of sockets (ports) for fibers (cables).
2
Ethernet LAN (RJ-45) ports:Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device. Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.
1
Connectivity technology:
Wired
Power
Input voltage:The voltage (V) which is required to power the product.
12 V
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
170 g
Height:The measurement of the product from head to foot or from base to top.
21.8 mm
Depth:The distance from the front to the back of something.
101.6 mm
Width:The measurement or extent of something from side to side.
59 mm
