Amplifier
Amplifier class:An electronic amplifier, amplifier, or (informally) amp is an electronic device that increases the power of a signal. It does this by taking energy from a power supply and controlling the output to match the input signal shape but with a larger amplitude. Power amplifier circuits (output stages) are classified as A, B, A/B and C for analog designs, and class D and E for switching designs based on the proportion of each input cycle (conduction angle), during which an amplifying device is passing current.
D
Amplifier:Electronic device for increasing the amplitude of electrical signals, used chiefly in sound reproduction.
Built-in
Audio
Total Harmonic Distortion (THD):Total harmonic distortion is a measure of non-linear harmonic\n\ndistortion and is given in %. Non-linear harmonic distortions are\n\nsignals which were not present in the original before the signal was\n\nconverted by the headphones. These unwanted signals are caused by the\n\ndiaphragm, whose movements do not precisely move in time with the\n\nelectric signals that cause it to move. Unfortunately, this is a\n\nfeature of all electroacoustic transducers. Although it cannot be\n\ncompletely eliminated, suitable steps can be taken to minimise it.\n\nHowever, the user is not interested in why this distortion takes place\n\nbut in how great the level of distortion must be for it to become\n\nperceptible. According to the findings of several research projects, a\n\ntotal harmonic distortion of 1% in the frequency range of 100 to 2000\n\nHz is imperceptible. Below 100 Hz, the perceptibility threshold lies\n\nat 10%.
1%
Crossover frequency:
1600 Hz
Signal-to-Noise Ratio (SNR):This is the ratio of signal intensity to noise intensity.
110 dB
Frequency range:The lowest and the hightest frequencies that can be inputted/produced.
70 - 20000 Hz
RMS rated power:RMS (Root mean square) is a measure of the continuous power required by a device, in particular audio amplfiers and loudspeakers.
40 W
General
Type:Characteristics of the device.
Loudspeakers
Loudspeakers
Woofer diameter (imperial):
7.62 cm (3")
Number of woofer drivers:
1
Woofer:Loudspeaker designed to reproduce low frequencies.
Tweeter diameter (imperial):
2.01 cm (0.79")
Number of tweeter drivers:
1
Tweeter:Loudspeaker designed to reproduce high frequencies.
Number of drivers:The quantity of drivers, which are individual transducers that converts electrical energy to sound waves.
2
Speaker placement:The position of the speaker.
Tabletop/bookshelf
Speaker type:Loudspeaker number of ways.
2-way
Packaging content
Cables included:
AC, Audio (3.5mm), RCA
Quantity per pack:The amount in each pack.
2 pc(s)
Packaging data
Package type:The type of product package e.g. box.
Box
Performance
On/off switch:The button which is pressed to switch the device on or off.
Plug and Play:Indicates whether this product supports is "plug and play". Plug and play is hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.
Recommended usage:What the product should be used for, and how it should be used (e.g. ambient temperature).
PC
Ports & interfaces
Connectivity technology:
Wired
Power
Power source type:What the power source is.
AC
Sustainability
Sustainability compliance:
Sustainability certificates:
CE, UKCA
Technical details
Warranty period:
2 year(s)
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
1.6 kg
Height:The measurement of the product from head to foot or from base to top.
186 mm
Depth:The distance from the front to the back of something.
159 mm
Width:The measurement or extent of something from side to side.
115 mm
