Battery
Battery recharge time:Approximate time required to recharge the battery from completely empty to completely full
3 h
Battery voltage:The voltage (V) of the battery.
5 V
Battery technology:The type of battery in the device, e.g. nickel–cadmium (NiCd).
Lithium
Features
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 40 °C
Audio output:The type of audio output that the device produces, and the connector(s).
3.5/6.3mm
Maximum operating distance:The maximum distance from which you can operate the device.
20 m
Average latency:The average duration before a device can start with a job (for example reading a file from a hard disk).
28 ms
Signal-to-Noise Ratio (SNR):This is the ratio of signal intensity to noise intensity.
59 dB
Total Harmonic Distortion (THD):Total harmonic distortion is a measure of non-linear harmonic\n\ndistortion and is given in %. Non-linear harmonic distortions are\n\nsignals which were not present in the original before the signal was\n\nconverted by the headphones. These unwanted signals are caused by the\n\ndiaphragm, whose movements do not precisely move in time with the\n\nelectric signals that cause it to move. Unfortunately, this is a\n\nfeature of all electroacoustic transducers. Although it cannot be\n\ncompletely eliminated, suitable steps can be taken to minimise it.\n\nHowever, the user is not interested in why this distortion takes place\n\nbut in how great the level of distortion must be for it to become\n\nperceptible. According to the findings of several research projects, a\n\ntotal harmonic distortion of 1% in the frequency range of 100 to 2000\n\nHz is imperceptible. Below 100 Hz, the perceptibility threshold lies\n\nat 10%.
0.5%
Operating frequency:The rate at which an electrical current alternates, usually measured in Hertz (Hz). Also the way to note a general location on the radio frequency spectrum such as 800 MHz, 900 MHz or 1900 MHz.
2400 MHz
Radio Frequency (RF) range:
2400 - 2483 MHz
Microphone
Operating voltage (microphone):
5 V
Microphone power source type:
Battery
Microphone frequency response:
100 - 8000 Hz
Microphone connectivity:How a microphone connect to a device e.g. wirelessly or via a cable and connector.
RF Wireless
Microphone type:
Handheld microphone
Packaging content
Number of receivers included:
1
Number of microphones included:The quantity of microphones that come with the product.
2
Power supply included:There is a power supply with this product.
Cables included:
Audio (3.5mm to 6.3mm), Audio (3.5mm), USB
Quick start guide:Instructions, either online, as a computer program or in paper form, to allow you to set up and start using the product quickly.
Power
Power consumption (receiver) (max):
2000 mA
Operating voltage (receiver):
5 V
Receiver
Receiver type:Describes type of receiver which is a device for picking up an external signal.
Stationary receiver
Transmitter
Transmitter type:
Built-in transmitter
