Design
Cable lock slot type:
Kensington
Cable lock slot:Holes on the edge of devices through which a cable lock can be passed, so the device can be locked to a desk etc.
Fan diameter:The size of the fan, measured by the distance from one side of the fan to the other, via a straight line going through the middle of the fan.
4 cm
Number of fans:The quantity of fans (apparatus with rotating blades that creates a current of air for cooling or ventilation).
3 fan(s)
Product colour:
Black, Grey
Cooling type:The method used to cool the device or to cool the air around the device.
Active
Chassis type:The type of rigid framework onto which is the hosuing for device components.
Rack (1U)
Memory
Memory form factor:Design of the memory e.g. 240-pin DIMM, SO-DIMM.
SO-DIMM
Memory slots:Number and type of memory expansion slots, including connector and memory module descriptions.
1
Maximum RAM supported:
32 GB
Internal memory:A computer's memory which is directly accessible to the CPU.
4 GB
Internal memory type:The type of internal memory such as RAM, GDDR5.
DDR4
Network
DHCP server:A server is a system which that responds to requests across a computer network to provide, or help to provide, a network service. DCHP servers uses the DCHP (Dynamic Host Configuration Protocol), which is a standardized networking protocol used by servers on an IP network to allocate IP addresses to computers. The purpose of DHCP is to automate the IP address configuration of a computer without a network administrator. IP addresses are typically selected from a range of assigned IP addresses stored in a database on the server and issued to a computer which requests a new IP address. An IP address is assigned to a computer for a set interval, after which, the computer must renew the IP address or acquire a new one.
Ethernet LAN data rates:The different speed levels of the Ethernet LAN connection.
100,1000,2500,10000 Mbit/s
Ethernet LAN:An Ethernet LAN (Local Area Network) interface is present, for a wired conection via a cable.
Networking
DHCP server:A server is a system which that responds to requests across a computer network to provide, or help to provide, a network service. DCHP servers uses the DCHP (Dynamic Host Configuration Protocol), which is a standardized networking protocol used by servers on an IP network to allocate IP addresses to computers. The purpose of DHCP is to automate the IP address configuration of a computer without a network administrator. IP addresses are typically selected from a range of assigned IP addresses stored in a database on the server and issued to a computer which requests a new IP address. An IP address is assigned to a computer for a set interval, after which, the computer must renew the IP address or acquire a new one.
Ethernet LAN data rates:The different speed levels of the Ethernet LAN connection.
100,1000,2500,10000 Mbit/s
Ethernet LAN:An Ethernet LAN (Local Area Network) interface is present, for a wired conection via a cable.
Operational conditions
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-20 - 70 °C
Operating relative humidity (H-H):
5 - 95%
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 40 °C
Packaging content
Cables included:
AC, LAN (RJ-45)
Performance
Access Control List (ACL):
Browser supported:List of supported browsers for this product.
Apple Safari, Google Chrome, Microsoft Edge, Mozilla Firefox, Microsoft Edge
On/off switch:The button which is pressed to switch the device on or off.
Remotely operated:The device can be controlled by remote control, which is a device that controls an apparatus by means of radio or infrared signals.
Universal Plug and Play (UPnP):
Backup features:
Cloud, iSCSI LUN
Backup function:The function if the main power source fails.
Device class:The category to which this device belongs.
Small & Medium Business
Type:Characteristics of the device.
NAS
Ports & interfaces
Concurrent connections:
1500
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
SFP+
Fiber ports quantity:The number of sockets (ports) for fibers (cables).
2
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity:
2
USB 2.0 ports quantity:Number of USB 2.0 ports (connecting interfaces) in the device. USB 2.0 was released in April 2000 (now called "Hi-Speed"), adding higher maximum signaling rate of 480 Mbit/s (effective throughput up to 35 MB/s or 280 Mbit/s), USB 2.0 ports are usually black.
2
USB port:Universal Serial Bus (USB) is an industry standard developed in the mid-1990s that defines the cables, connectors and communications protocols used in a bus for connection, communication, and power supply between computers and electronic devices. USB was designed to standardize the connection of computer peripherals (including keyboards, pointing devices, digital cameras, printers, portable media players, disk drives and network adapters) to personal computers, both to communicate and to supply electric power. It has become commonplace on other devices, such as smartphones, PDAs and video game consoles. USB has effectively replaced a variety of earlier interfaces, such as serial and parallel ports, as well as separate power chargers for portable devices.
Ethernet LAN (RJ-45) ports:Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device. Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.
2
Power
AC input frequency:
50 - 60 Hz
AC input voltage:The voltage of the AC electricity that is inpitted into the product.
100 - 240 V
Power consumption (HDD standby):
17.367 W
Power consumption (typical):Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.
30.878 W
Number of power supply units:
1
Power supply unit (PSU) capacity:
100 W
Power supply location:Where the power supply is positioned.
Built-in
Processor
Processor cores:The number of central processing units ('cores') in a processor. Some processors have 1 core, others have 2 (e.g. Intel Core Duo) or more (e.g. the Intel Xeon E7-2850 has 10 cores).
4
Processor frequency:The speed that the microprocessor executes each instruction or each vibration of the clock. The CPU requires a fixed number of clock ticks, or cycles, to execute each instruction. The faster the clocks rate, the faster the CPU, or the faster it can execute instructions. Clock Speeds are usually determined in MHz, 1 MHz representing 1 million cycles per second, or in GHz, 1 GHz representing 1 thousand million cycles per second. The higher the CPU speed, the better a computer will perform.
2.2 GHz
Processor model:The model number for the processor in a computer.
CN9131
Processor family:A family of processors is a group of processors produced by one company over a short period of time e.g. Intel Pentium processors.
Marvell
Processor manufacturer:The manufacturer that produced the processor.
Marvell
Software
Server operating systems supported:
Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019
Mac operating systems supported:Mac operating systems e.g. OS X can be used with the device.
Linux operating systems supported:8 RT. Linux (9.4, 9.5), Red Hat Enterprise Linux 5.0 (supported with a pre-built package); SUSE Linux (10.3, 11.0, 11, 11.1, 11.2), Fedora (9, 9.0, 10, 10.0, 11.0, 11, 12, 12.0), Ubuntu (8.04, 8.04.1, 8.04.2, 8.10, 9.04, 9.10, 10.04), Debian (5.0, 5.0.1, 5.0.2, 5.0.3)
Windows operating systems supported:Windows vesions wich can be used with the device.
Operating system version:The version of the operating system used e.g. 4.1, 4.2 for Android.
5.1.7
Operating system installed:Type of operating system on a device e.g. IOS on Apple devices, Android for mobile devices.
QNAP QTS
Storage
Supported file systems:
FAT32, HFS+, NTFS, exFAT, ext3, ext4
Hot-swap drive bays:The places where drives (hot-swap drives) can be inserted to or removed from the computer.
RAID levels:RAID is a storage technology that combines multiple disk drive components into a logical unit for the purposes of data redundancy and performance improvement. Data is distributed across the drives in one of several ways, referred to as RAID levels, depending on the specific level of redundancy and performance required.
0, 1, 5, 6, 10, JBOD
RAID support:The device uses RAID, which is a storage technology that combines multiple disk drive components into a logical unit for the purposes of data redundancy and performance improvement. Data is distributed across the drives in one of several ways, referred to as RAID levels, depending on the specific level of redundancy and performance required.
Storage drive sizes supported:The sizes of storage drives that can be used with the product.
2.5,3.5,M.2
Supported storage drive interfaces:
Serial ATA III
Storage drive interface:Where the storage device links with other parts of the product, or an external device.
M.2, Serial ATA II, Serial ATA III
Storage drive capacity:The amount of data that can be stored on the storage drive.
2 TB
Supported storage drive types:
HDD & SSD
Installed storage drive type:Type of storage drives built into the device e.g. HDD (hard disk drive), SSD (solid-state drive).
HDD
Number of storage drives supported:
4
Number of storage drives installed:Amount of storage drives built into the device.
4
Total installed storage capacity:
8 TB
Storage drives installed:Storage drives are built into the system.
Weight & dimensions
Height:The measurement of the product from head to foot or from base to top.
43.3 mm
Depth:The distance from the front to the back of something.
292.1 mm
Width:The measurement or extent of something from side to side.
430 mm