Design
LED indicators:
HDD, Status, USB
Number of fans:The quantity of fans (apparatus with rotating blades that creates a current of air for cooling or ventilation).
2 fan(s)
Chassis type:The type of rigid framework onto which is the hosuing for device components.
Rack (1U)
Memory
Internal memory type:The type of internal memory such as RAM, GDDR5.
DDR3
Internal memory:A computer's memory which is directly accessible to the CPU.
1 GB
Network
Wi-Fi:Popular technology that allows an electronic device to exchange data or connect to the internet wirelessly using radio waves.
Ethernet LAN:An Ethernet LAN (Local Area Network) interface is present, for a wired conection via a cable.
Networking
Wi-Fi:Popular technology that allows an electronic device to exchange data or connect to the internet wirelessly using radio waves.
Ethernet LAN:An Ethernet LAN (Local Area Network) interface is present, for a wired conection via a cable.
Operational conditions
Operating relative humidity (H-H):
0 - 95%
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 40 °C
Other features
Performance management:
S.M.A.R.T., HHS
Performance
Access Control List (ACL):
Management protocols:
SNMP
Ports & interfaces
eSATA ports quantity:The number of ports (interfaces) for eSATA. eSATA is a a computer bus interface that connects host bus adapters to mass storage devices such as hard disk drives and optical drives.
2
Fiber ports quantity:The number of sockets (ports) for fibers (cables).
0
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity:
2
USB 2.0 ports quantity:Number of USB 2.0 ports (connecting interfaces) in the device. USB 2.0 was released in April 2000 (now called "Hi-Speed"), adding higher maximum signaling rate of 480 Mbit/s (effective throughput up to 35 MB/s or 280 Mbit/s), USB 2.0 ports are usually black.
2
Ethernet LAN (RJ-45) ports:Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device. Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.
2
Power
AC input frequency:
50 - 60 Hz
AC input voltage:The voltage of the AC electricity that is inpitted into the product.
100-240 V
Power consumption (typical):Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.
250 W
Processor
Number of processors installed:Number of processors in the product.
1
Processor frequency:The speed that the microprocessor executes each instruction or each vibration of the clock. The CPU requires a fixed number of clock ticks, or cycles, to execute each instruction. The faster the clocks rate, the faster the CPU, or the faster it can execute instructions. Clock Speeds are usually determined in MHz, 1 MHz representing 1 million cycles per second, or in GHz, 1 GHz representing 1 thousand million cycles per second. The higher the CPU speed, the better a computer will perform.
1.6 GHz
Processor family:A family of processors is a group of processors produced by one company over a short period of time e.g. Intel Pentium processors.
Marvell
Software
Mac operating systems supported:Mac operating systems e.g. OS X can be used with the device.
Linux operating systems supported:8 RT. Linux (9.4, 9.5), Red Hat Enterprise Linux 5.0 (supported with a pre-built package); SUSE Linux (10.3, 11.0, 11, 11.1, 11.2), Fedora (9, 9.0, 10, 10.0, 11.0, 11, 12, 12.0), Ubuntu (8.04, 8.04.1, 8.04.2, 8.10, 9.04, 9.10, 10.04), Debian (5.0, 5.0.1, 5.0.2, 5.0.3)
Windows operating systems supported:Windows vesions wich can be used with the device.
Storage
Supported file systems:
ext3, ext4, FAT32, HFS+, NTFS
Hot-swap drive bays:The places where drives (hot-swap drives) can be inserted to or removed from the computer.
RAID levels:RAID is a storage technology that combines multiple disk drive components into a logical unit for the purposes of data redundancy and performance improvement. Data is distributed across the drives in one of several ways, referred to as RAID levels, depending on the specific level of redundancy and performance required.
0, 1, 5, 6, 10
RAID support:The device uses RAID, which is a storage technology that combines multiple disk drive components into a logical unit for the purposes of data redundancy and performance improvement. Data is distributed across the drives in one of several ways, referred to as RAID levels, depending on the specific level of redundancy and performance required.
Maximum supported storage capacity:
12 TB
Storage drive size:
2.5/3.5"
Storage drive interface:Where the storage device links with other parts of the product, or an external device.
Serial ATA, Serial ATA II
Number of storage drives supported:
4
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
6.7 kg
Height:The measurement of the product from head to foot or from base to top.
44 mm
Depth:The distance from the front to the back of something.
483 mm
Width:The measurement or extent of something from side to side.
439 mm
