Design
Chassis type:The type of rigid framework onto which is the hosuing for device components.
Rack (2U)
Features
Commodity Classification Automated Tracking System (CCATS):
G157815L1
Export Control Classification Number (ECCN):
5A002U
Trusted Platform Module (TPM) version:
2.0
Trusted Platform Module (TPM):
Integrated BMC with IPMI:
Graphics
On-board graphics card model:
Aspeed AST2500
Logistics data
Harmonized System (HS) code:
8473301180
Memory
Maximum internal memory:The maximum internal memory which is available in the product.
12 TB
Supported memory types:Types of memory which can be used with the product.
DDR4-SDRAM
Number of DIMM slots:The number of places where DIMMs can be connected. A DIMM or dual in-line memory module comprises a series of dynamic random-access memory integrated circuits. These modules are mounted on a printed circuit board and designed for use in personal computers, workstations and servers. DIMMs began to replace SIMMs (single in-line memory modules) as the predominant type of memory module as Intel P5-based Pentium processors began to gain market share.
32
Other features
Extended warranty available for purchase (select countries):
Riser slot 1 number of lanes:
32
Riser slot 2 number of lanes:
32
Riser slot 3 number of lanes:
16
Supported RAID configuration:
0/1/5/10
CPU configuration (max):
2
Ports & interfaces
Number of SATA connectors:
10
Serial ports quantity:The number of serial ports in a computer or peripheral. A serial port is a serial communication physical interface through which information transfers in or out one bit at a time. The term "serial port" usually identifies hardware more or less compliant to the RS-232 standard, intended to interface with a modem or with a similar communication device. In modern computers and peripherals, serial ports have largely been replaced by USBs and other interfaces.
2
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity:
4
USB 2.0 ports quantity:Number of USB 2.0 ports (connecting interfaces) in the device. USB 2.0 was released in April 2000 (now called "Hi-Speed"), adding higher maximum signaling rate of 480 Mbit/s (effective throughput up to 35 MB/s or 280 Mbit/s), USB 2.0 ports are usually black.
1
Power
Thermal Design Power (TDP):
270 W
Redundant power supply (RPS) support:Additional power supply which can run a computer if the main power supply fails.
Power supply:The way in which the product is powered e.g. rechargeable battery, mains electricity connected via a plug and cable.
2100 W
Power supply type:The type of power supply which this product uses.
AC
Processor
Number of processors supported:The quantity of processors which can be used by the product.
2
Processor manufacturer:The manufacturer that produced the processor.
Intel
Processor socket:Mechanical component(s) that provides mechanical and electrical connections between a microprocessor and a printed circuit board (PCB). This allows the processor to be replaced without soldering.
LGA 4189
Motherboard chipset:The chipset connects the microprocessor to the rest of the motherboard.
Intel C621A
Processor special features
Intel® Optane™ Memory Ready:
Intel Virtualization Technology for Directed I/O (VT-d):Simplify Virtualization and Reduce Overheads\nIntel® Virtualization Technology (Intel® VT) helps make virtualization practical by eliminating performance overheads, reducing complexity, and improving security with hardware assistance. Virtualization allows multiple workloads to share a common set of resources so that a variety of workloads can co-locate while maintaining full isolation from each other.
Intel Intelligent Power Node Manager:
Intel Remote Management Module Support:
Intel Advanced Management Technology:
Storage
RAID levels:RAID is a storage technology that combines multiple disk drive components into a logical unit for the purposes of data redundancy and performance improvement. Data is distributed across the drives in one of several ways, referred to as RAID levels, depending on the specific level of redundancy and performance required.
0, 1, 5, 10
Number of storage drives supported:
8
Weight & dimensions
Depth:The distance from the front to the back of something.
446 mm
Height:The measurement of the product from head to foot or from base to top.
87 mm
Width:The measurement or extent of something from side to side.
770 mm
