Audio
RMS rated power:RMS (Root mean square) is a measure of the continuous power required by a device, in particular audio amplfiers and loudspeakers.
10 W
Number of built-in speakers:
2
Built-in speaker(s):The device contains speaker(s) to produce sound.
Certificates
Certification:
CB, CE, TÜV-Bauart, EAC, RoHS support, ErP, WEEE, REACH
Design
Bezel width (side):
1.4 cm
Bezel width (bottom):
1.4 cm
Panel mounting interface:
200 x 200 mm
Product design:
Digital signage flat panel
Display
Horizontal scan range:
30 - 83 kHz
Display diagonal (metric):This is the size of the display screen, measured diagonally.
108 cm
Active display area (W x H):
940.9 x 529.3 mm
Pixel pitch:This is the parameter of a picture tube, which specifies the shortest distance between two dots of the same colour. The principle is: the smaller the dot pitch, the better sharpness of image.
0.49 x 0.49 mm
Display number of colours:
1.7 billion colours
Viewing angle, vertical:Maximum vertical angle at which a display can be viewed with acceptable visual performance.
178°
Viewing angle, horizontal:Maximum horizontal angle at which a display can be viewed with acceptable visual performance.
178°
Contrast ratio (typical):The difference in light intensity between the brightest white and the darkest black.
1200:1
Response time:The response time is the time difference between the moment that a source (for example a video card) sends a signal and that equipment (for example a monitor) receives or display the signal. (Used abbreviations: R/F = Rise and Fall.)
8 ms
Native aspect ratio:The aspect ratio is the ratio of the width of an image to its height. The native aspect ratio is the one which the projector/display is particularly designed for. Images shown in native aspect ratio will utilize the entire resolution of the display and achieve maximum brightness. Images shown in other than native aspect ratio will always have less resolution and less brightness than images shown in native aspect ratio.
16:9
HD type:Type of supported High Definition (e.g. Full HD, 4K Ultra HD).
Full HD
Display brightness:Brightness is the amount of radiating light emitted from the screen. The brightness rating is measured in candellas per square meter, commonly known as 'nits'.
350 cd/m²
Display resolution:The number of distinct pixels in each dimension that can be displayed. It is usually quoted as width × height, with the units in pixels: for example, "1024 × 768" means the width is 1024 pixels and the height is 768 pixels. The higher the number of pixels, the sharper the image.
1920 x 1080 pixels
Display technology:The technology used in the display e.g. plasma, LED.
LCD
Display diagonal:Size of the display for this product, measured diagonally, usually in inches.
108 cm (42.5")
Features
General
Type:Characteristics of the device.
Signage Displays
Operational conditions
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-20 - 60 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 40 °C
Packaging content
Cables included:
HDMI, Power, RS-232
Packaging data
Package height:The distance from the top to the bottom of the packaging.
683 mm
Package depth:The distance from the front to the back of the packaging.
127 mm
Package width:The distance from one side of the packaging to the other.
1075 mm
Performance
Mean time between failures (MTBF):Statistical model used to indicate product/mechanism reliability; expressed in hours and percentage of duty cycle. This number (in hours) does not indicate the mean time before failure for a single unit/mechanism.
50000 h
HDCP:High-bandwidth Digital Content Protection (HDCP) is a form of digital copy protection to prevent copying of digital audio and video content as it travels across connections.
Operating hours (hours/days):
18/7
Number of OSD languages:
11
On Screen Display (OSD) languages:
Simplified Chinese, Czech, German, Dutch, English, Spanish, French, Italian, Japanese, Polish, Russian
Ports & interfaces
Ethernet LAN (RJ-45) ports:Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device. Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.
1
Ethernet LAN:An Ethernet LAN (Local Area Network) interface is present, for a wired conection via a cable.
USB version:Universal Serial Bus (USB) is an industry standard developed in the mid-1990s that defines the interface used for connection, communication and power supply between computers and electronic devices. Every new version - for example 1.1, 2.0, 3.0 - is much faster than the previous one.
2.0
USB port:Universal Serial Bus (USB) is an industry standard developed in the mid-1990s that defines the cables, connectors and communications protocols used in a bus for connection, communication, and power supply between computers and electronic devices. USB was designed to standardize the connection of computer peripherals (including keyboards, pointing devices, digital cameras, printers, portable media players, disk drives and network adapters) to personal computers, both to communicate and to supply electric power. It has become commonplace on other devices, such as smartphones, PDAs and video game consoles. USB has effectively replaced a variety of earlier interfaces, such as serial and parallel ports, as well as separate power chargers for portable devices.
VGA (D-Sub) input ports:Sockets in the device for VGA (D-Sub) inputs, which are sockets with 15 holes. The 15-pin VGA connector is found on many video cards, computer monitors, and high definition television sets.
1
HDMI ports quantity:The number of sockets (ports) for HDMI connections. HDMI (High-Definition Multimedia Interface) is a compact audio/video interface for transferring uncompressed video data and compressed/uncompressed digital audio data from a HDMI-compliant device ("the source device") to a compatible computer monitor, video projector, digital television, or digital audio device. HDMI is a digital replacement for existing analog video standards.
3
Power
Energy efficiency scale:
A to G
AC input frequency:
50/60 Hz
AC input voltage:The voltage of the AC electricity that is inpitted into the product.
100 - 240 V
Energy consumption (SDR) per 1000 hours:
53 kWh
Energy efficiency class (SDR):
G
Power consumption (off):
0.3 W
Power consumption (standby):The amount of electricity that is consumed when the product is on standby.
0.5 W
Power consumption (typical):Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.
53 W
Technical details
Compliance certificates:
CB, CE, EAC, REACH, RoHS, TÜV mark, WEEE
Sustainability certificates:
ErP
Weight & dimensions