Call management
Caller ID on call waiting:
Caller ID:The name and/or number of the caller comes up on screen when they ring the phone. You also send your caller ID when you call someone else unless you choose to deactivate it.
Design
Mounting type:Type of mounting e.g. wall mounting.
Desk
Display
Backlight display:A backlight is a form of illumination used in liquid crystal displays (LCDs). As LCDs do not produce light themselves - unlike for example Cathode ray tube (CRT) displays - they need illumination (ambient light or a special light source) to produce a visible image. Backlights are used in small displays to increase readability in low light conditions such as in watches, and in computer displays and LCD televisions to produce light in a manner similar to a CRT display.
Display resolution:The number of distinct pixels in each dimension that can be displayed. It is usually quoted as width × height, with the units in pixels: for example, "1024 × 768" means the width is 1024 pixels and the height is 768 pixels. The higher the number of pixels, the sharper the image.
103 x 65 pixels
Display diagonal:Size of the display for this product, measured diagonally, usually in inches.
4.06 cm (1.6")
Display:The description of display that can includes display type, resolution, size etc.
LCD
Built-in display:A display which is part of the product, so you do not need to attach another display.
Management features
Other features
Packaging content
Number of handsets included:
2
Performance
Ringer type:The category of ringer which indicates when someone is phoning you.
Polyphonic
Answering machine:The product contains an answering machine where you can leave messages if the phone is unanswered/engaged (busy).
Type:Characteristics of the device.
DECT telephone
Phone features
Phonebook capacity:The number of names/numbers that can be stored in the phonebook of a phone.
120 entries
Speakerphone:Device has a microphone and loudspeaker provided separately from those in the handset. This device allows multiple persons to participate in a conversation. The loudspeaker broadcasts the voice or voices of those on the other end of the telephone line, while the microphone captures all voices of those using the speakerphone.
Power
Power consumption (typical):Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.
0.5 W
Talk time:The total time a battery can power a device for calls. As the device drains the battery during a call, the talktime left in the battery is diminished until the device is turned off or the battery recharged. The longer the talktime the less frequently you will need to recharge. Talktime, expressed in hours and minutes, is much shorter than standby time because transmission requires more power.
18 h
Battery recharge time:Approximate time required to recharge the battery from completely empty to completely full
7 h
Battery technology:The type of battery in the device, e.g. nickel–cadmium (NiCd).
Nickel-Metal Hydride (NiMH)
Number of batteries supported:The number of batteries that can be used with the product.
2
Battery type:Description of battery supplied with the product, such battery form factor (e.g. AA/AAA).
AAA
Weight & dimensions
Base dimensions:
63 x 106 x 87 mm
Handset dimensions (WxDxH):
165 x 48 x 32 mm
