Overview



New slim type with more practicability and convenience

PLANET has released the ISW-511 / ISW-511S15, an advanced industrial hardened Ethernet Switch with new slim type, IP-30 metal case. They each are equipped with 4 10/100Base-TX auto-negotiation ports. The ISW-511 has one 100Base-FX multi-mode SC interface for transmission distance up to 2km, and the ISW-511S15 has one 100Base-FX single-mode SC interface for transmission distance up to 15km. Both of them operate reliably in Heavy Industrial demanding environments. The compact, IP-30 standard metal case allows either DIN rail or wall mounting for efficient use of cabinet space.

Stable Operating Performance under Difficult Environments

The ISW-511 / ISW-511S15 provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets. Being able to operate under the temperature range from -10 to 60 degrees C, the ISW-511 / ISW-511S15 can be placed in almost any difficult environment. The ISW-511 / ISW-511S15 also possesses an integrated power supply source with wide range of voltages (12 to 48V DC) for worldwide high availability applications requiring dual or backup power inputs.

Robust Switch performance

The ISW-511 / ISW-511S15 each provides four 10/100Base-TX Ethernet ports and one 100Base-FX optic-fiber SC interface, and boasts a high performance switch architecture that is capable of providing non-blocking switch fabric and wire-speed throughput as high as 1Gbps. With 2K MAC address table, they offer wire-speed packets transfer performance without risk of packet loss. The Flow Control function allows the ISW-511 / ISW-511S15 for fast and reliable data transfer.

All of the RJ-45 copper interfaces in the ISW-511 / ISW-511S15 support 10/100Mbps auto negotiation for optimal speed detection through RJ-45 Category 3, 4 or 5 cables. The standard auto-MDI/MDI-X support can detect the type of connection to any Ethernet device without requiring special straight or crossover cables.




At-a-glance



  • –1 Mbit on-chip frame buffer

  • –-10 to 60 degrees C operating temperature

  • –12 to 48V DC, redundant power with polarity reverse protect function and connective removable terminal block for master and slave power

  • –1-port 100Base-FX interface for up to 2km (Multi-mode fiber 50µm/125µm) on ISW-511

  • –4-port 10/100Base-TX RJ-45 with auto MDI/MDI-X function

  • –Automatic address learning and address aging

  • –Backplane (Switching Fabric): 1Gbps

  • –Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX Ethernet standard

  • –CSMA/CD Protocol

  • –DIN rail and wall mount design

  • –High performance Store and Forward architecture

  • Industrial Case / Installation

  • –Integrated address look-up engine, support 2K absolute MAC addresses

  • –IP-30 metal case / protection

  • Layer 2 Features

  • Physical Port

  • –Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)

  • –Supports 6000 VDC Ethernet ESD protection

  • –Supports auto negotiation and 10/100Mbps half / full duplex mode for each copper port

  • –Supports EFT protection 6000 VDC for power line




Reasons to buy


  • –1 Mbit on-chip frame buffer
  • –-10 to 60 degrees C operating temperature
  • –12 to 48V DC, redundant power with polarity reverse protect function and connective removable terminal block for master and slave power
  • –1-port 100Base-FX interface for up to 2km (Multi-mode fiber 50µm/125µm) on ISW-511
  • –4-port 10/100Base-TX RJ-45 with auto MDI/MDI-X function
  • –Automatic address learning and address aging
  • –Backplane (Switching Fabric): 1Gbps
  • –Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX Ethernet standard
  • –CSMA/CD Protocol
  • –DIN rail and wall mount design
  • –High performance Store and Forward architecture
  • Industrial Case / Installation
  • –Integrated address look-up engine, support 2K absolute MAC addresses
  • –IP-30 metal case / protection
  • Layer 2 Features
  • Physical Port
  • –Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • –Supports 6000 VDC Ethernet ESD protection
  • –Supports auto negotiation and 10/100Mbps half / full duplex mode for each copper port
  • –Supports EFT protection 6000 VDC for power line

Specification


Technical Description: PLANET ISW-511 network switch Unmanaged L2 Fast Ethernet (10/100) Black

Certificates
Certification:
FCC, CE UL, cUL

Certification
Certification:
FCC, CE UL, cUL

Data transmission
Store-and-forward:
Yes
Throughput:Rate at which data can be transferred.
0.74 Mpps
Switching capacity:The data transfer capacity of the switch per second.
1 Gbit/s
MAC address table:The MAC address is the 'Media Access Control Address'. It is a unique address given to a network interface controller (NIC) in a device. A MAC address table shows the addresses in a table format.
2048 entries

Design
DIN rail mounting:
Yes
International Protection (IP) code:The IP code classifies and rates the degree of protection provided against the intrusion (including body parts such as hands and fingers), dust, accidental contact, and water by mechanical casings and electrical enclosures. It is published by the International Electrotechnical Commission (IEC). The digits (characteristic numerals) indicate conformity with the conditions summarized in the tables below. Where there is no protection rating with regard to one of the criteria, the digit is replaced with the letter X. an electrical socket rated IP22 is protected against insertion of fingers and will not be damaged or become unsafe during a specified test in which it is exposed to vertically or nearly vertically dripping water. Another example is the Sony Xperia Z Ultra, one of the first cellular phones to be IP-rated; it is rated at IP58 and marketed as "dust resistant" and can be "immersed in 1.5 meter of freshwater for up to 30 minutes".
IP30
Wall mountable:The product can be mounted on (attached to ) a wall.
Yes
LED indicators:
Yes
Housing material:
Metal
Product colour:
Black
Stackable:Devices can be placed on top of each other.
Yes
Rack mounting:The type of mounting that can position devices in a shelving system (rack).
No

Logistics data
Harmonized System (HS) code:
85176990

Management features
Switch layer:A network switch is a computer networking device that links networking segments. A switch has different layers, such as layer 2 (a network bridge, operating at the data link layer, interconnecting a small number of devices) and layer 4 (can act as a firewall, amongst other things).
L2
Switch type:What switch device has, managed or unmanaged.
Unmanaged

Network
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Yes
Auto-negotiation:
Yes
Flow control support:
Yes
MAC address auto-aging supported:
Yes
MAC address auto-learning supported:
Yes
Full duplex:A full-duplex system allows communication in both directions, and unlike half-duplex, allows this to happen simultaneously.
Yes
Copper ethernet cabling technology:
10BASE-T, 100BASE-TX
10G support:The product can use Oracle 10G, which is a database management system introduced in 2003.
No
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3, IEEE 802.3u, IEEE 802.3x

Networking
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Yes
Auto-negotiation:
Yes
Flow control support:
Yes
MAC address auto-aging supported:
Yes
MAC address auto-learning supported:
Yes
Full duplex:A full-duplex system allows communication in both directions, and unlike half-duplex, allows this to happen simultaneously.
Yes
Copper ethernet cabling technology:
10BASE-T, 100BASE-TX
10G support:The product can use Oracle 10G, which is a database management system introduced in 2003.
No
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3, IEEE 802.3u, IEEE 802.3x

Operational conditions
Heat dissipation:The heat generated by the power supply.
31 BTU/h
Storage relative humidity (H-H):
5 - 90%
Operating relative humidity (H-H):
5 - 90%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 85 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
-10 - 60 °C

Optical fiber
RX sensitivity:
-34.5 dB
Transmission distance (max):
2 km
Wavelength:The distance over which a wave repeats itself. The wavelength determines the characteristics of the wave e.g. red light has a different wavelength to blue light.
1300 nm
Fiber type:
Multi-mode
Fiber ethernet cabling technology:
100BASE-FX

Ports & interfaces
Fiber ports quantity:The number of sockets (ports) for fibers (cables).
1
Installed SFP+ modules quantity:An SFP ("small form-factor pluggable transceiver") is a transmitter/receiver which interfaces a network device motherboard (e.g. in a switch, router) to a fibre optic or copper network cable. The enhanced small form-factor pluggable (SFP+) is an enhanced version of the SFP that supports data rates up to 10 Gbit/s. The "SFP+ ports quantity" is the number of ports for SFP+ connections in a device.
0
Installed SFP modules quantity:An SFP ("small form-factor pluggable transceiver") is a transmitter/receiver which interfaces a network device motherboard (e.g. in a switch, router) to a fibre optic or copper network cable. The "SFP ports quantity" is the number of ports for SFP connections in a device.
0
Fast Ethernet (copper) ports quantity:
4
Basic switching RJ-45 Ethernet ports type:The type/category of basic switching RJ-45 Ethernet ports (sockets).
Fast Ethernet (10/100)
Basic switching RJ-45 Ethernet ports quantity:The number of basic switching RJ-45 Ethernet ports (sockets).
4

Power
Power consumption (typical):Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.
9.1 W
Redundant power supply (RPS) support:Additional power supply which can run a computer if the main power supply fails.
Yes
Power supply included:There is a power supply with this product.
Yes

Power over Ethernet (PoE)
Power over Ethernet (PoE):The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.
No

Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
436 g
Height:The measurement of the product from head to foot or from base to top.
32 mm
Depth:The distance from the front to the back of something.
97 mm
Width:The measurement or extent of something from side to side.
135 mm


Product details


ISW-511 Planet 4711213688652

PLANET ISW-511 network switch Unmanaged L2 Fast Ethernet (10/100) Black

£76.99 and In stock

SKUISW-511

PLANET ISW-511 network switch Unmanaged L2 Fast Ethernet (10/100) Black

Quick Code: Q1619186 MPN: ISW-511
£64.16ex VAT

19 in stock
Quantity:
In Stock

Key Features

  • Physical Port
  • Layer 2 Features
  • –High performance Store and Forward architecture
  • –Backplane (Switching Fabric): 1Gbps
  • –1 Mbit on-chip frame buffer
  • –Automatic address learning and address aging