Main product

Overview


Slim Type with more Practicability and Convenience

PLANET ISW-501T, an Industrial 5-port Fast Ethernet Switch, provides non-blocking wire-speed performance in harsh industrial environment. It also provides 5-port 10/100BASE-TX RJ45 copper interfaces delivered in an IP30 rugged, strong case with redundant power system. Its slim case is suitable for such applications as surveillance system deployments, control management and wireless service in climatically demanding environments with wide temperature range from -40 to 75 degrees C.


Energy Saving with Lower Power Consumption

The ISW-501T, adopting the advanced green networking technology, provides the IEEE 802.3az protocol based power saving. This feature makes the ISW-501T consume very low power in full load operation mode, which helps conserve energy effectively but maintains high performance efficiently.


Stable Performance under Difficult Environments

The ISW-501T provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets. Being able to operate under the temperature range from -40 to 75 degrees C, the ISW-501T can be placed in almost any difficult environment. The ISW-501T also possesses an integrated power supply source with wide range of voltages (12 to 48V DC, 24V AC) for worldwide high availability applications requiring dual or backup power inputs.


Robust Switch Performance

Built in a high-performance switch architecture, the ISW-501T comes with five 10/100Mbps Fast Ethernet ports providing non-blocking switch fabric and wire-speed throughput as high as 1Gbps, and the 1K MAC address. Thus, the ISW-501T can transfer wire-speed packets without the risk of packet loss. The flow control function enables the ISW-501T to provide fast and reliable data transfer.

All of the RJ45 copper interfaces in the ISW-501T support 10/100Mbps auto negotiation for optimal speed detection through RJ45 Category 5 or 5e cables. The standard auto-MDI/MDI-X support can detect the type of connection to any Ethernet device without requiring special straight-through or crossover cables.




At-a-glance


  • 12 to 48V DC, redundant power with polarity reverse protection function and connective removable terminal block for master and slave power, 24V AC power support

  • 40 to 75 degrees C operating temperature

  • 5-port 10/100BASE-TX RJ45 with auto MDI/MDI-X function

  • Automatic address learning and address aging

  • Backplane (switching fabric): 1Gbps

  • Complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX Ethernet standard

  • DIN rail and wall-mount design

  • Free fall, shock-proof and vibration-proof for industries

  • High performance Store and Forward architecture; runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth

  • Industrial Case & Installation

  • Integrated address look-up engine, supporting 1K absolute MAC addresses

  • IP30-rated metal case

  • Layer 2 Features

  • Lower Power Consumption device in full load operation mode

  • Physical Port

  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)

  • Supports 6000 VDC Ethernet ESD protection

  • Supports auto-negotiation and 10/100Mbps half/full duplex mode

  • Supports EFT protection for 6000 VDC for power line




Reasons to buy

  • 12 to 48V DC, redundant power with polarity reverse protection function and connective removable terminal block for master and slave power, 24V AC power support
  • 40 to 75 degrees C operating temperature
  • 5-port 10/100BASE-TX RJ45 with auto MDI/MDI-X function
  • Automatic address learning and address aging
  • Backplane (switching fabric): 1Gbps
  • Complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX Ethernet standard
  • DIN rail and wall-mount design
  • Free fall, shock-proof and vibration-proof for industries
  • High performance Store and Forward architecture; runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Industrial Case & Installation
  • Integrated address look-up engine, supporting 1K absolute MAC addresses
  • IP30-rated metal case
  • Layer 2 Features
  • Lower Power Consumption device in full load operation mode
  • Physical Port
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • Supports 6000 VDC Ethernet ESD protection
  • Supports auto-negotiation and 10/100Mbps half/full duplex mode
  • Supports EFT protection for 6000 VDC for power line

Specification

Technical Description: PLANET ISW-501T network switch Unmanaged L2 Fast Ethernet (10/100) Blue
Certificates
Certification:
FCC, CE, IEC

Certification
Certification:
FCC, CE, IEC

Data transmission
Maximum data transfer rate:
0.1 Gbit/s
Store-and-forward:
Yes
Switching capacity:The data transfer capacity of the switch per second.
1 Gbit/s
Supported data transfer rates:Rates at which data can be transferred. May vary according to network configurations.
10/100Mbps
MAC address table:The MAC address is the 'Media Access Control Address'. It is a unique address given to a network interface controller (NIC) in a device. A MAC address table shows the addresses in a table format.
2000 entries

Design
DIN rail mounting:
Yes
International Protection (IP) code:The IP code classifies and rates the degree of protection provided against the intrusion (including body parts such as hands and fingers), dust, accidental contact, and water by mechanical casings and electrical enclosures. It is published by the International Electrotechnical Commission (IEC). The digits (characteristic numerals) indicate conformity with the conditions summarized in the tables below. Where there is no protection rating with regard to one of the criteria, the digit is replaced with the letter X. an electrical socket rated IP22 is protected against insertion of fingers and will not be damaged or become unsafe during a specified test in which it is exposed to vertically or nearly vertically dripping water. Another example is the Sony Xperia Z Ultra, one of the first cellular phones to be IP-rated; it is rated at IP58 and marketed as "dust resistant" and can be "immersed in 1.5 meter of freshwater for up to 30 minutes".
IP30
Wall mountable:The product can be mounted on (attached to ) a wall.
Yes
LED indicators:
Yes
Product colour:
Blue
Stackable:Devices can be placed on top of each other.
No
Rack mounting:The type of mounting that can position devices in a shelving system (rack).
No

Logistics data
Harmonized System (HS) code:
85176990

Management features
Switch layer:A network switch is a computer networking device that links networking segments. A switch has different layers, such as layer 2 (a network bridge, operating at the data link layer, interconnecting a small number of devices) and layer 4 (can act as a firewall, amongst other things).
L2
Switch type:What switch device has, managed or unmanaged.
Unmanaged

Network
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Yes
Flow control support:
Yes
Full duplex:A full-duplex system allows communication in both directions, and unlike half-duplex, allows this to happen simultaneously.
Yes
10G support:The product can use Oracle 10G, which is a database management system introduced in 2003.
No
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3, IEEE 802.3u, IEEE 802.3x

Networking
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Yes
Flow control support:
Yes
Full duplex:A full-duplex system allows communication in both directions, and unlike half-duplex, allows this to happen simultaneously.
Yes
10G support:The product can use Oracle 10G, which is a database management system introduced in 2003.
No
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3, IEEE 802.3u, IEEE 802.3x

Operational conditions
Storage relative humidity (H-H):
5 - 95%
Operating relative humidity (H-H):
5 - 95%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 75 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
-40 - 75 °C

Other features
Packet transfer speed:Rate at which data can be transferred by packet.
0.74Mp/s

Ports & interfaces
Installed SFP+ modules quantity:An SFP ("small form-factor pluggable transceiver") is a transmitter/receiver which interfaces a network device motherboard (e.g. in a switch, router) to a fibre optic or copper network cable. The enhanced small form-factor pluggable (SFP+) is an enhanced version of the SFP that supports data rates up to 10 Gbit/s. The "SFP+ ports quantity" is the number of ports for SFP+ connections in a device.
0
Installed SFP modules quantity:An SFP ("small form-factor pluggable transceiver") is a transmitter/receiver which interfaces a network device motherboard (e.g. in a switch, router) to a fibre optic or copper network cable. The "SFP ports quantity" is the number of ports for SFP connections in a device.
0
Basic switching RJ-45 Ethernet ports type:The type/category of basic switching RJ-45 Ethernet ports (sockets).
Fast Ethernet (10/100)
Basic switching RJ-45 Ethernet ports quantity:The number of basic switching RJ-45 Ethernet ports (sockets).
5

Power
Power consumption (typical):Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.
3.9 W
DC input voltage:
48 V
Power supply included:There is a power supply with this product.
No

Power over Ethernet (PoE)
Power over Ethernet (PoE):The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.
No

Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
400 g
Height:The measurement of the product from head to foot or from base to top.
32 mm
Depth:The distance from the front to the back of something.
87 mm
Width:The measurement or extent of something from side to side.
135 mm

Product details

ISW-501T Planet 4711213686795

PLANET ISW-501T network switch Unmanaged L2 Fast Ethernet (10/100) Blue

£80.99 and In stock

SKU: ISW-501T

PLANET ISW-501T network switch Unmanaged L2 Fast Ethernet (10/100) Blue

Quick Code: Q464141 MPN: ISW-501T
£67.49ex VAT

19 in stock
Quantity:
In Stock

Key Features

  • Physical Port
  • Layer 2 Features
  • Backplane (switching fabric): 1Gbps
  • Automatic address learning and address aging
  • Industrial Case & Installation
  • IP30-rated metal case