Main product

Overview


The HD-EX270 HDMI extender allows you to extend the distance of your HDMI 2.0 signal up to 70m via a single Cat6 / Cat6A / Cat7 Ethernet cable. The extender supports resolutions of up to 2016p at 60Hz, whilst also supporting High Dynamic Range with HDR10. It also supports I/R pass through via the supplied adapters.





Reasons to buy

  • Audio Support: LPCM / DTS-HD / DTS-Audio / Dolby Digital 5.1CH
  • HDCP Version: HDCP 2.2 (HDCP 1.4 compatible)
  • HDMI Version: HDMI 2.0 (HDMI 1.4 compatible)
  • Max Input Cable Length: 8m (24AWG)
  • Max Output Cable Length: 8m (24AWG)
  • Transmission Distance: Up to 70 metres
  • Transmission Medium: Cat6 / Cat6A / Cat7
  • Video Bandwidth: 18Gbps

Specification

Technical Description: Cables Direct HD-EX270 AV Extenders - Black
Features
Product colour:
Black
Audio formats supported:The audio formats which this device or software can read/use e.g. MP3, MP4.
DTS, LPCM
Bandwidth:Bandwidth is the difference between the upper and lower frequencies in a continuous set of frequencies. It is typically measured in Hertz (Hz). A key characteristic of bandwidth is that any band of a given width can carry the same amount of information, regardless of where that band is located in the frequency spectrum. For example, a 3 kHz band can carry a telephone conversation whether that band is at baseband (as in a POTS telephone line) or modulated to some higher frequency.
18 Gbit/s
Cable length:How long the cable is.
8 m
HDCP:High-bandwidth Digital Content Protection (HDCP) is a form of digital copy protection to prevent copying of digital audio and video content as it travels across connections.
Yes
HDCP version:
2.2
Plug and Play:Indicates whether this product supports is "plug and play". Plug and play is hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.
Yes
Audio output channels:An audio output channel is an electric circuit which acts as a path for a signal produced by a device. A device may have several audio output channels.
5.1 channels
Extended display identification data (EDID):
Yes
Maximum refresh rate:
60 Hz
Maximum transfer distance:The greatest distance over which the data/signal can be transferred.
70 m
Cable types supported:
Cat6, Cat6a, Cat7
Maximum resolution:The maximum number of pixels that can be displayed in the image. It is usually quoted as width × height,: for example, "1024 × 768" means the width is 1024 pixels and the height is 768 pixels.
3840 x 2160 pixels
Type:Characteristics of the device.
AV transmitter & receiver

General
Type:Characteristics of the device.
AV Extenders

Packaging content
IR blaster included:
Yes
IR receiver included:
Yes
Manual:
Yes
AC adapter included:
Yes

Ports & interfaces
Remote (IR) input:
2
Remote (IR) output:
2
HDMI in:Port (socket) for HDMI input.
1
HDMI version:
2.0
Number of HDMI outputs:
2
Connectivity technology:
Wired

Product details

HD-EX270 Cables Direct 5055781248467

Cables Direct HD-EX270 AV Extenders - Black

£109.99 and

SKU: HD-EX270

Cables Direct HD-EX270 AV Extenders - Black

Quick Code: Q819963 MPN: HD-EX270
£91.66ex VAT

Out of Stock

Key Features

  • HDMI Version: HDMI 2.0 (HDMI 1.4 compatible)
  • HDCP Version: HDCP 2.2 (HDCP 1.4 compatible)
  • Transmission Medium: Cat6 / Cat6A / Cat7
  • Transmission Distance: Up to 70 metres
  • Video Bandwidth: 18Gbps
  • Max Input Cable Length: 8m (24AWG)