Overview



Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-802S40, GT-806S60, GT-805A and GT-806A/B media converters support conversion between 10/100/1000BASE-T and 1000BASE-SX/LX networks. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively.


Distance Extension with High Performance and Steady Network Communications

PLANET GT-80x gigabit media converter series extends communication distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000BASE-T and 1000BASE-SX/LX interfaces for various fiber optic applications.


Enhanced Smart Management

The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Passthrough function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the network. The DIP switch can disable or enable the LFP function.

- LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission.
- LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter’s fiber will disconnect the link of transmission.

Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the network.


Easy Installation

The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R/MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T and IEEE 802.3z 1000BASE-LX/SX, the Gigabit media conversion installation is quite quick and easy with its Plug and Play feature. The GT-80x also supports flow control and back pressure in half-duplex mode to eliminate packet loss.




At-a-glance



  • 1000BASE-LX WDM interface is for up to 15km (single-mode fiber 9µm/125µm) on GT-806A15/GT-806B15

  • 1000BASE-T: 2-pair Cat. 5/5e/6 UTP cable, up to 100 meters

  • 9K jumbo frame supported

  • Choice of fiber connectors from SC, LC and WDM; multi-mode/single-mode fiber for 1000BASE SFP interface

  • Compact in size, easy installation

  • Compact size for working with PLANET MC family media chassis (MC-700/MC-1500/MC-1500R/MC-1500R48)

  • Complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T, IEEE 802.3z 1000BASE-SX/LX

  • Fiber media allows

  • IEEE 802.3x flow control for full duplex and back pressure for half duplex eliminate the loss of packets

  • Layer 2 key features

  • LED indicators for easy network diagnostics

  • Media conversion between 10/100/1000BASE-T and 1000BASE-SX/LX

  • Multi-mode fiber using SC/LC/WDM connector

  • Non-blocking full wire-speed forwarding rate

  • Provides DIP switch for LFP function (Disable/Enable) setting

  • Single-mode fiber using SC/LC/WDM connector

  • Store-and-Forward mechanism

  • Supports auto MDI/MDI-X function

  • TP port supports 10/100/1000BASE-T auto-negotiation and auto-MDI/MDI-X

  • Wall-mountable design




Reasons to buy


  • 1000BASE-LX WDM interface is for up to 15km (single-mode fiber 9µm/125µm) on GT-806A15/GT-806B15
  • 1000BASE-T: 2-pair Cat. 5/5e/6 UTP cable, up to 100 meters
  • 9K jumbo frame supported
  • Choice of fiber connectors from SC, LC and WDM; multi-mode/single-mode fiber for 1000BASE SFP interface
  • Compact in size, easy installation
  • Compact size for working with PLANET MC family media chassis (MC-700/MC-1500/MC-1500R/MC-1500R48)
  • Complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T, IEEE 802.3z 1000BASE-SX/LX
  • Fiber media allows
  • IEEE 802.3x flow control for full duplex and back pressure for half duplex eliminate the loss of packets
  • Layer 2 key features
  • LED indicators for easy network diagnostics
  • Media conversion between 10/100/1000BASE-T and 1000BASE-SX/LX
  • Multi-mode fiber using SC/LC/WDM connector
  • Non-blocking full wire-speed forwarding rate
  • Provides DIP switch for LFP function (Disable/Enable) setting
  • Single-mode fiber using SC/LC/WDM connector
  • Store-and-Forward mechanism
  • Supports auto MDI/MDI-X function
  • TP port supports 10/100/1000BASE-T auto-negotiation and auto-MDI/MDI-X
  • Wall-mountable design

Specification


Technical Description: PLANET GT-806A15 network media converter 2000 Mbit/s 1310 nm Black

Certificates
Certification:
FCC, CE

Certification
Certification:
FCC, CE

Features
LED indicators:
Yes
Product colour:
Black
Internal:The product is built in.
No

Logistics data
Harmonized System (HS) code:
85176990

Network
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Yes
Jumbo frames:
9000
Jumbo frames support:
Yes
Data transfer rate:Rate at which data can be transferred, usually measured in units per second. May vary with network configurations.
1000 Mbit/s
Fiber ethernet cabling technology:
1000BASE-LX
Copper ethernet cabling technology:
10BASE-T, 100BASE-T, 1000BASE-T
Ethernet LAN data rates:The different speed levels of the Ethernet LAN connection.
10,100,1000 Mbit/s
Ethernet interface type:
Gigabit Ethernet
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Maximum data transfer rate:
2000 Mbit/s

Networking
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Yes
Jumbo frames:
9000
Jumbo frames support:
Yes
Data transfer rate:Rate at which data can be transferred, usually measured in units per second. May vary with network configurations.
1000 Mbit/s
Fiber ethernet cabling technology:
1000BASE-LX
Copper ethernet cabling technology:
10BASE-T, 100BASE-T, 1000BASE-T
Ethernet LAN data rates:The different speed levels of the Ethernet LAN connection.
10,100,1000 Mbit/s
Ethernet interface type:
Gigabit Ethernet
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Maximum data transfer rate:
2000 Mbit/s

Operational conditions
Storage relative humidity (H-H):
5 - 95%
Operating relative humidity (H-H):
5 - 95%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-10 - 70 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 50 °C

Performance
Wavelength-division multiplexing (WDM):
Yes
Wavelength:The distance over which a wave repeats itself. The wavelength determines the characteristics of the wave e.g. red light has a different wavelength to blue light.
1310 nm
Maximum transfer distance:The greatest distance over which the data/signal can be transferred.
15000 m

Ports & interfaces
DC-in jack:The socket/plug where the DC electricity supply connects to the device.
Yes
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
SC
Ethernet LAN (RJ-45) ports:Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device. Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.
1
Connectivity technology:
Wired

Power
Power consumption (typical):Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.
4.6 W
Input current:
2 A
Input voltage:The voltage (V) which is required to power the product.
5 V

Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
200 g
Height:The measurement of the product from head to foot or from base to top.
26 mm
Depth:The distance from the front to the back of something.
70 mm
Width:The measurement or extent of something from side to side.
94 mm


Product details


GT-806A15 Planet 4711213686894

PLANET GT-806A15 network media converter 2000 Mbit/s 1310 nm Black

£58.00 and In stock

SKUGT-806A15

PLANET GT-806A15 network media converter 2000 Mbit/s 1310 nm Black

Quick Code: Q464032 MPN: GT-806A15
£48.33ex VAT

18 in stock
Quantity:
In Stock

Key Features

  • Layer 2 key features
  • Supports auto MDI/MDI-X function
  • Store-and-Forward mechanism
  • Non-blocking full wire-speed forwarding rate
  • Fiber media allows
  • Multi-mode fiber using SC/LC/WDM connector