Logistics data
Harmonized System (HS) code:
84716070
Operational conditions
Operating relative humidity (H-H):
0 - 95%
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
-10 - 50 °C
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-20 - 70 °C
Packaging data
Charging base:Normally connected to mains electricity, this is the bottom part of a portable phone etc. which allows a device to be charged when it is placed on/in it.
Performance
Protection features:Physical effects from which the product is protected e.g. water resistant, crash proof.
Electrostatic Discharge (ESD) protection
International Protection (IP) code:The IP code classifies and rates the degree of protection provided against the intrusion (including body parts such as hands and fingers), dust, accidental contact, and water by mechanical casings and electrical enclosures. It is published by the International Electrotechnical Commission (IEC). The digits (characteristic numerals) indicate conformity with the conditions summarized in the tables below. Where there is no protection rating with regard to one of the criteria, the digit is replaced with the letter X. an electrical socket rated IP22 is protected against insertion of fingers and will not be damaged or become unsafe during a specified test in which it is exposed to vertically or nearly vertically dripping water. Another example is the Sony Xperia Z Ultra, one of the first cellular phones to be IP-rated; it is rated at IP58 and marketed as "dust resistant" and can be "immersed in 1.5 meter of freshwater for up to 30 minutes".
IP52
Ports & interfaces
Operating frequency:The rate at which an electrical current alternates, usually measured in Hertz (Hz). Also the way to note a general location on the radio frequency spectrum such as 800 MHz, 900 MHz or 1900 MHz.
2400 MHz
Bluetooth version:The type of bluetooth technology in the product e.g. Bluetooth Smart (v4.0).
4.0
Standard interfaces:Most common industry-standard communication protocols ranging from RS-232, RS-422, RS-423, RS-485, and LVDS to USB.
Bluetooth
Connectivity technology:
Wireless
Power
Input voltage:The voltage (V) which is required to power the product.
4.5 - 14 V
Charging time:The amount of time needed to charge the product.
4 h
Number of reads per charge:
80000
Battery voltage:The voltage (V) of the battery.
3.6 V
Battery capacity:A measure of the charge stored by the battery. Determined by the mass of active material contained in the battery.
2550 mAh
Number of batteries supported:The number of batteries that can be used with the product.
1
Battery type:Description of battery supplied with the product, such battery form factor (e.g. AA/AAA).
Built-in battery
Battery technology:The type of battery in the device, e.g. nickel–cadmium (NiCd).
Lithium-Ion (Li-Ion)
Power source type:What the power source is.
Battery
Scanning
Scanner resolution:
0.077 mm
Yaw reading angle:
-65 - 65°
Pitch reading angle:
-65 - 65°
Tilt reading angle:
-45 - 45°
Light levels (direct sunlight):
0 - 130000 lx
Read rate (max):
400 reads/s
Linear (1D) barcodes supported:The product can read linear (1D) barcordes.
GS1 DataBar
Sensor type:A sensor is a convertor than measures a physical quality (light, temperature etc.) and displays this electronically on a device.
CCD
Scanner type:A scanner is a device that optically scans images, printed text, handwriting, or an object, and converts it to a digital image. Common examples found in offices are variations of the desktop (or flatbed) scanner where the document is placed on a glass window for scanning. There are different types of scanners e.g. flatbed, pen, sheet-feed.
1D
Type:Characteristics of the device.
Handheld bar code reader
Technical details
Compliance certificates:
RoHS
Sustainability certificates:
RoHS
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
235 g
Height:The measurement of the product from head to foot or from base to top.
109 mm
Depth:The distance from the front to the back of something.
68 mm
Width:The measurement or extent of something from side to side.
166 mm
