Certificates
Compliance certificates:
RoHS
Certification
Compliance certificates:
RoHS
Features
Product colour:
Black, Green
Internal:The product is built in.
Logistics data
Harmonized System (HS) code:
85176990
Network
Duplex system:A duplex communication system is a point-to-point system composed of two connected parties or devices that can communicate with one another in both directions, simultaneously.
Full, Half
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Ethernet LAN data rates:The different speed levels of the Ethernet LAN connection.
1000 Mbit/s
Ethernet interface type:
Gigabit Ethernet
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3z
Converter output interface:
1000Base-LX, 1000Base-SX
Converter input interface:A convertor changes one form of signal into another e.g. A/D Converter changes a signal from analog to digital. A convertor input interface is the place where a convertor connects to the product in order to input the converted signal.
1000Base-T
Maximum data transfer rate:
1250 Mbit/s
Networking
Duplex system:A duplex communication system is a point-to-point system composed of two connected parties or devices that can communicate with one another in both directions, simultaneously.
Full, Half
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Ethernet LAN data rates:The different speed levels of the Ethernet LAN connection.
1000 Mbit/s
Ethernet interface type:
Gigabit Ethernet
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3z
Converter output interface:
1000Base-LX, 1000Base-SX
Converter input interface:A convertor changes one form of signal into another e.g. A/D Converter changes a signal from analog to digital. A convertor input interface is the place where a convertor connects to the product in order to input the converted signal.
1000Base-T
Maximum data transfer rate:
1250 Mbit/s
Operational conditions
Operating relative humidity (H-H):
10 - 90%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-10 - 70 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 60 °C
Packaging content
Packaging data
Package weight:Weight of the packaged product.
184 g
Package height:The distance from the top to the bottom of the packaging.
27 mm
Package depth:The distance from the front to the back of the packaging.
185 mm
Package width:The distance from one side of the packaging to the other.
130 mm
Performance
Mean time between failures (MTBF):Statistical model used to indicate product/mechanism reliability; expressed in hours and percentage of duty cycle. This number (in hours) does not indicate the mean time before failure for a single unit/mechanism.
65000 h
Ports & interfaces
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
SFP
Fiber ports quantity:The number of sockets (ports) for fibers (cables).
1
Ethernet LAN (RJ-45) ports:Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device. Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.
1
Connectivity technology:
Wired
Power
Power over Ethernet (PoE):The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.
Power consumption (typical):Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.
8 W
Input voltage:The voltage (V) which is required to power the product.
12 V
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
100 g
Height:The measurement of the product from head to foot or from base to top.
20 mm
Depth:The distance from the front to the back of something.
140 mm
Width:The measurement or extent of something from side to side.
75 mm
