Main product

Overview


The DPE-301GS PoE splitter is used with end devices such as wireless access points, IP cameras and VoIP phones that don’t natively support PoE, but rather require DC power input of 5V, 9V or 12V. It receives PoE power on a network cable from a PoE switch or midspan injector, and splits the Ethernet and DC power into two separate cables. One cable provides the DC power, and the other cable provides the Ethernet signal. Users can select from 5VDC, 9VDC and 12VDC power for their device using a selectable DIP switch on the device.

The DPE-301GS PoE splitter is typically located near the end device. It has two 10/100/1000 RJ-45 ports. One port is for PoE IN, which is the network connection and is usually connected to a remote PoE switch or injector. The other port is for LAN OUT, which is the connection that provides the Ethernet signal to the end device. The DPE-301GS also has a 5.5mm DC OUT port. Two adapter cables are supplied; either one may be connected to this port, depending on whether 5.5mm or 3.8mm interface is required for the end device.




Reasons to buy

  • Auto-negotiation on Ethernet port Reliability
  • Compatible with all standard PoE devices and restricts power input to avoid damaging Power Sourcing Equipment (PSE)
  • Connect your devices at Gigabit speeds
  • Flexible Power Options
  • IEEE 802.3at (PoE+) and IEEE 802.3af (PoE) compliant
  • Overcurrent protection voltage (5 V, 9 V, or 12 V) and plugging in Ethernet cables; no additional software is required
  • Plug-and-Play, so no software required
  • Provides power over existing network cabling when paired with a Power Source Equipment (such as the DPE-301GI) to a non-PoE device
  • Receives power up to 100 metres away
  • Reduces installation and network equipment costs by removing the need for electrical wiring
  • Separates a PoE Ethernet cable into DC power and a standard Ethernet cable
  • Simplicity
  • Supports 5 V, 9 V, and 12 V output voltages
  • Transforms incoming AC power to low-voltage DC power Gigabit Connectivity

Specification

Technical Description: Pack of 5 D-Link DPE-301GS 1 Port Gigabit 30W PoE Splitter
Certificates
Certification:
CE, FCC, VCCI, RCM

Certification
Certification:
CE, FCC, VCCI, RCM

Features
Product colour:
White
Power over Ethernet (PoE):The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.
Yes
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u

General
Type:Characteristics of the device.
Network Splitters

Logistics data
Pallet gross length:
120 cm
Pallet gross width:
110 cm
Products per shipping (inner) case:
40 pc(s)
Shipping (inner) case height:
32.5 cm
Shipping (inner) case length:
44.5 cm
Shipping (inner) case width:
33.2 cm

Operational conditions
Operating relative humidity (H-H):
5 - 95%
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 50 °C
Storage relative humidity (H-H):
5 - 95%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-30 - 70 °C

Packaging data
Package weight:Weight of the packaged product.
230 g
Package height:The distance from the top to the bottom of the packaging.
61 mm
Package depth:The distance from the front to the back of the packaging.
156 mm
Package width:The distance from one side of the packaging to the other.
106 mm

Ports & interfaces
Ethernet LAN (RJ-45) ports:Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device. Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.
2

Power
Output power:The power that the device can produce.
32.4 W

Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
98 g

Product details

DPE-301GS-PackOF5Qty D-Link 0790069416675

Pack of 5 D-Link DPE-301GS 1 Port Gigabit 30W PoE Splitter

£95.28 and In stock

SKU: DPE-301GS-PackOF5Qty


Parent Product

DPE-301GS D-Link


MPN: DPE-301GS

Pack of 5 D-Link DPE-301GS 1 Port Gigabit 30W PoE Splitter

Multiple Quantity Discount Pack

Please Note: This product pack contains 5 indevidual units. The price displayed is for 5 units.
Quick Code: Q3364142 MPN: DPE-301GS-PackOF5Qty
£79.40ex VAT

1 in stock
Buying in Bulk? get quantity discounts
delivery_truck_speedExpected Delivery Monday 3rd August