Main product

Overview


- Optimum ventilation and air extraction
- Lockable glass door guarantees security
- 483 mm (19") profile rails mounted at the front and rear inside the enclosure, galvanized

The Dynamic series wall-mounted network cabinets have been developed for simple and particularly cost-optimized network expansion. The roof, base and rear panel of each cabinet are equipped with a pre-punched cable inlet. The roof chassis is also provided with a punched-out area to accommodate a fan module. Two pairs of galvanized 483 mm (19") profile rails, labelled with height units that can be read in both directions, are installed inside. These can be adjusted in depth. Each cabinet is a robust steel construction made of up to 1.2 mm thick sheet steel. The coloring takes the form of electrostatic powder coating in the standard colors grey (RAL 7035) and black (RAL 9005). Removable side panels and the lockable and removable front door improve accessibility. The door hinges can be changed. Wall mounting is carried out in two simple steps: The supplied mounting plate is screwed to the wall and then connected to the housing.




At-a-glance


  • 1.0 - 1.2 mm robust sheet steel with high load-bearing capacity, powder-coated

  • 1-point locking on the front door

  • 230° door opening angle

  • 4 earthing points (base, side panel and front door) with protective cap

  • 483 mm (19") profile rails are adjustable in depth and marked with the height unit

  • 483 mm (19") profile rails mounted at the front and rear inside the enclosure, galvanized

  • Cable entry possible at the rear, roof and base (pre-punched cut-outs)

  • Installation depth for components (standard maximum): 369 - 470 mm

  • Lockable safety glass door with steel frame

  • Protection class IP20

  • Roof is prepared to accommodate a fan element (punched-out mounts)

  • Ventilation slots for active and passive ventilation




Reasons to buy

  • 1.0 - 1.2 mm robust sheet steel with high load-bearing capacity, powder-coated
  • 1-point locking on the front door
  • 230° door opening angle
  • 4 earthing points (base, side panel and front door) with protective cap
  • 483 mm (19") profile rails are adjustable in depth and marked with the height unit
  • 483 mm (19") profile rails mounted at the front and rear inside the enclosure, galvanized
  • Cable entry possible at the rear, roof and base (pre-punched cut-outs)
  • Installation depth for components (standard maximum): 369 - 470 mm
  • Lockable safety glass door with steel frame
  • Protection class IP20
  • Roof is prepared to accommodate a fan element (punched-out mounts)
  • Ventilation slots for active and passive ventilation

Specification

Technical Description: Pack of 5 Digitus Wall-mounted enclosure Dynamic Basic series - 600x600 mm (WxD)
Features
International Protection (IP) code:The IP code classifies and rates the degree of protection provided against the intrusion (including body parts such as hands and fingers), dust, accidental contact, and water by mechanical casings and electrical enclosures. It is published by the International Electrotechnical Commission (IEC). The digits (characteristic numerals) indicate conformity with the conditions summarized in the tables below. Where there is no protection rating with regard to one of the criteria, the digit is replaced with the letter X. an electrical socket rated IP22 is protected against insertion of fingers and will not be damaged or become unsafe during a specified test in which it is exposed to vertically or nearly vertically dripping water. Another example is the Sony Xperia Z Ultra, one of the first cellular phones to be IP-rated; it is rated at IP58 and marketed as "dust resistant" and can be "immersed in 1.5 meter of freshwater for up to 30 minutes".
IP20
Front door key lock:
Yes
Key lock:
Yes
Side panels included:Indicates if the side panels are included or not
Yes
Removable side panels:
Yes
Side panel construction:
Steel
Front door construction:
Glass
Material:The material from which a thing is or can be made e.g. wood, plastic.
Steel
Product colour:
Black
Maximum weight capacity:The maximum weight that the product is designed to hold/store.
60 kg
Type:Characteristics of the device.
Wall mounted rack
Rack capacity:The spase that device fill in rack.
7U

Logistics data
UK Trade Tariff code:
94032080
Country of origin:Country where the device is made.
China
Harmonized System (HS) code:
85381000

Packaging data
Package weight:Weight of the packaged product.
18 kg
Package volume:
167958 cm³
Package height:The distance from the top to the bottom of the packaging.
480 mm
Package depth:The distance from the front to the back of the packaging.
430 mm
Package width:The distance from one side of the packaging to the other.
630 mm

Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
24 kg
Height:The measurement of the product from head to foot or from base to top.
416 mm
Depth:The distance from the front to the back of something.
600 mm
Width:The measurement or extent of something from side to side.
600 mm

Product details

DN-19 07U-6/6-EC-SW-PackOF5Qty Digitus 4016032257790

Pack of 5 Digitus Wall-mounted enclosure Dynamic Basic series - 600x600 mm (WxD)

£499.82 and In stock

SKU: DN-19 07U-6/6-EC-SW-PackOF5Qty


Parent Product

DN-19 07U-6/6-EC-SW Digitus


MPN: DN-19 07U-6/6-EC-SW

Pack of 5 Digitus Wall-mounted enclosure Dynamic Basic series - 600x600 mm (WxD)

Multiple Quantity Discount Pack

Please Note: This product pack contains 5 indevidual units. The price displayed is for 5 units.
Quick Code: Q3210487 MPN: DN-19 07U-6/6-EC-SW-PackOF5Qty
£416.52ex VAT

1 in stock
Buying in Bulk? get quantity discounts