Main product

Overview


Gigabit Performance
The DGS-1210/ME Series Gigabit Managed Switches come in a variety of port setups, including Gigabit Ethernet RJ-45 and SFP ports. The DGS-1210-10P/ME, DGS-1210-28P/ME and DGS-1210-52MP/ME switches feature Power over Ethernet (PoE), allowing compatible devices to be installed and powered in remote locations without immediate access to power outlets.

Efficient and Resilient Networking
For mission critical environments, the DGS-1210/ME Series Gigabit Managed Switches support IEEE 802.1D 2004 edition, 802.1w, and 802.1s Spanning Tree Protocols (STP). The Spanning Tree Protocol allows the switches to participate in Spanning Tree topology, providing an alternative Layer 2 path in the event of a network failover. The switches also support IEEE 802.3ad link aggregation, which enables multiple ports to be grouped to form a single virtual port, increasing bandwidth and redundancy for higher availability. This series furthermore features IEEE 802.1p Quality of Service (QoS), allowing for real-time traffic classification into Weighted Round Robin (WRR) and strict priority levels mapped to 8 queues. Advanced traffic classification parameters allow the network to be tuned for flexible configurations for specific multimedia applications such as VoIP or IPTV.

Traffic & Bandwidth Control
Integrated bandwidth control allows network administrators to define the throughput levels for ingress and egress bandwidth. It provides a minimum granularity of 64 Kbps for ingress port and flow-based bandwidth control, and a minimum granularity of 64 Kbps for egress queue bandwidth. The DGS-1210/ME Series also supports traffic control, which optimizes performance by dropping packets when exceeding a set threshold, while port mirroring helps administrators facilitate traffic diagnostics and track network performance. The DGS-1210/ME Series also provides IGMP snooping with IGMP authentication to prune multicast traffic and to optimize available bandwidth.




Specification

Technical Description: Pack of 5 D-Link DGS-1210-28 network switch Managed L2/L2+ 1U Black
Certificates
Certification:
IEC61000-4-5, RoHS

Certification
Certification:
IEC61000-4-5, RoHS

Data transmission
Packet buffer memory:
1.5 MB
Jumbo frames:
9216
Jumbo frames support:
Yes
Number of static routes:
32
Number of queues:
8
Store-and-forward:
Yes
Forwarding rate:
41.7 Mpps
Switching capacity:The data transfer capacity of the switch per second.
56 Gbit/s
MAC address table:The MAC address is the 'Media Access Control Address'. It is a unique address given to a network interface controller (NIC) in a device. A MAC address table shows the addresses in a table format.
16000 entries

Design
Electromagnetic compatibility:List of countries and their respective regulatory agency standards with which the product complies.
FCC A, CE A, VCCI, C-Tick, BSMI, CCC
Number of fans:The quantity of fans (apparatus with rotating blades that creates a current of air for cooling or ventilation).
2 fan(s)
LED indicators:
Activity, Fan fail, Link, Power, Speed
Product colour:
Black, Grey
Form factor:The shape or design of the product.
1U
Stackable:Devices can be placed on top of each other.
Yes
Rack mounting:The type of mounting that can position devices in a shelving system (rack).
Yes

General
Type:Characteristics of the device.
Network Switches

Management features
MIB support:
RFC1213MIB II, RFC1493, RFC1907, RFC1757, 2819, RFC2021, RFC1398, 1643, 1650, 2358, 2665, RFC2674, 4363, RFC 2233, 2863, RFC 2618, RFC 2620, RFC 2925
Traffic classification:
Yes
Web-based management:Using a website/web application to manage something.
Yes
Quality of Service (QoS) support:
Yes
Switch layer:A network switch is a computer networking device that links networking segments. A switch has different layers, such as layer 2 (a network bridge, operating at the data link layer, interconnecting a small number of devices) and layer 4 (can act as a firewall, amongst other things).
L2+
Switch type:What switch device has, managed or unmanaged.
Managed

Multicast features
Multicast Listener Discovery (MLD) snooping:
MLD v1, MLD v2
Multicast support:
Yes

Network
Number of VLANs:
4094
Virtual LAN features:
MAC address-based VLAN, Port-based VLAN, Tagged VLAN, Voice VLAN
VLAN support:A Virtual Local Area Network (VLAN) consists of a group of computers and switches that can be physically distributed over different networks and buildings, but form one LAN on a logical level.
Yes
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Yes
Auto-sensing:
Yes
Flow control support:
Yes
Link aggregation:
Yes
Rate limiting:
Yes
Spanning tree protocol:
Yes
Full duplex:A full-duplex system allows communication in both directions, and unlike half-duplex, allows this to happen simultaneously.
Yes
IP routing:
Yes
Port mirroring:
Yes
Copper ethernet cabling technology:
10BASE-T, 100BASE-TX, 100BASE-T, 1000BASE-T
10G support:The product can use Oracle 10G, which is a database management system introduced in 2003.
No
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1v, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ah, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z

Networking
Number of VLANs:
4094
Virtual LAN features:
MAC address-based VLAN, Port-based VLAN, Tagged VLAN, Voice VLAN
VLAN support:A Virtual Local Area Network (VLAN) consists of a group of computers and switches that can be physically distributed over different networks and buildings, but form one LAN on a logical level.
Yes
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Yes
Auto-sensing:
Yes
Flow control support:
Yes
Link aggregation:
Yes
Rate limiting:
Yes
Spanning tree protocol:
Yes
Full duplex:A full-duplex system allows communication in both directions, and unlike half-duplex, allows this to happen simultaneously.
Yes
IP routing:
Yes
Port mirroring:
Yes
Copper ethernet cabling technology:
10BASE-T, 100BASE-TX, 100BASE-T, 1000BASE-T
10G support:The product can use Oracle 10G, which is a database management system introduced in 2003.
No
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1v, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ah, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z

Operational conditions
Heat dissipation:The heat generated by the power supply.
850.58 BTU/h
Storage relative humidity (H-H):
5 - 90%
Operating relative humidity (H-H):
10 - 90%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 70 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
-5 - 50 °C

Optical fiber
Fiber ethernet cabling technology:
1000BASE-X

Performance
Noise level:The amplitude level of the undesired background noise, usually measured in decibels (db).
52.4 dB
Flash memory:
32 MB
Internal memory:The amount of memory, usually measured in bytes (e.g. MB, GB), which is installed in the system's hardware.
256 MB
Memory type:Type of memory in the device e.g. DDR3, SRAM (Static RAM).
DDR3-SDRAM

Ports & interfaces
Console port:
RJ-45
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
SFP
SFP module slots quantity:
4
Installed SFP+ modules quantity:An SFP ("small form-factor pluggable transceiver") is a transmitter/receiver which interfaces a network device motherboard (e.g. in a switch, router) to a fibre optic or copper network cable. The enhanced small form-factor pluggable (SFP+) is an enhanced version of the SFP that supports data rates up to 10 Gbit/s. The "SFP+ ports quantity" is the number of ports for SFP+ connections in a device.
0
Installed SFP modules quantity:An SFP ("small form-factor pluggable transceiver") is a transmitter/receiver which interfaces a network device motherboard (e.g. in a switch, router) to a fibre optic or copper network cable. The "SFP ports quantity" is the number of ports for SFP connections in a device.
0
Basic switching RJ-45 Ethernet ports type:The type/category of basic switching RJ-45 Ethernet ports (sockets).
Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity:The number of basic switching RJ-45 Ethernet ports (sockets).
24

Power
Power consumption (typical):Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.
27.49 W
AC input frequency:
50/60 Hz
AC input voltage:The voltage of the AC electricity that is inpitted into the product.
100 - 240 V
Power source:What is providing power for the product e.g. mains electricity.
AC/DC

Security
Authentication:
Guest VLAN, MAC-based authentication, Port-based authentication
BPDU filtering/protection:
Yes
IP-MAC-Port binding:
Yes
Loop protection:
Yes
Security algorithms:Security algorithms are used to provide authentication, cipher key generation, integrity and radio link privacy to users on mobile networks. The security algorithms supported are the ones that can be used with this product.
802.1x RADIUS, SNMP, SSH
SSH/SSL support:
Yes
IGMP snooping:
Yes
Access Control List (ACL) rules:
256
Access Control List (ACL):
Yes
DHCP features:
DHCP client

Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
3.86 kg
Height:The measurement of the product from head to foot or from base to top.
44 mm
Depth:The distance from the front to the back of something.
210 mm
Width:The measurement or extent of something from side to side.
440 mm

Product details

DGS-1210-28-PackOF5Qty D-Link 0790069468216

Pack of 5 D-Link DGS-1210-28 network switch Managed L2/L2+ 1U Black

£660.90 and In stock

SKU: DGS-1210-28-PackOF5Qty


Parent Product

DGS-1210-28 D-Link


MPN: DGS-1210-28

Pack of 5 D-Link DGS-1210-28 network switch Managed L2/L2+ 1U Black

Multiple Quantity Discount Pack

Please Note: This product pack contains 5 indevidual units. The price displayed is for 5 units.
Quick Code: Q2416218 MPN: DGS-1210-28-PackOF5Qty
£550.75ex VAT

1 in stock
Buying in Bulk? get quantity discounts