Features
Certification:
REACH, CE, FCC, UR
Compatible products:Other products that can be used with this product.
CTP-SFP-1GE-LX
Brand compatibility:What other brands this brand can be used with.
Juniper
Mean time between failures (MTBF):Statistical model used to indicate product/mechanism reliability; expressed in hours and percentage of duty cycle. This number (in hours) does not indicate the mean time before failure for a single unit/mechanism.
53972659 h
General
Type:Characteristics of the device.
Network Transceiver Modules
Logistics data
Products per master (outer) case:
36 pc(s)
Master (outer) case height:
255 mm
Harmonized System (HS) code:
85369010
Master (outer) case length:
295 mm
Master (outer) case width:
344 mm
Packaging data
Package weight:Weight of the packaged product.
80 g
Package height:The distance from the top to the bottom of the packaging.
15 mm
Package depth:The distance from the front to the back of the packaging.
230 mm
Package width:The distance from one side of the packaging to the other.
207 mm
Number of products included:The number of products that are included in the package.
1 pc(s)
Performance
Digital Diagnostics Monitoring (DDM):
Duplex system:A duplex communication system is a point-to-point system composed of two connected parties or devices that can communicate with one another in both directions, simultaneously.
Full
Fiber ethernet cabling technology:
1000BASE
Wavelength:The distance over which a wave repeats itself. The wavelength determines the characteristics of the wave e.g. red light has a different wavelength to blue light.
1310 nm
Maximum transfer distance:The greatest distance over which the data/signal can be transferred.
10000 m
SFP transceiver standard:
LX
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
LC
Multi-mode fiber (MMF) supported:
Single-mode fiber (SMF) supported:
Maximum data transfer rate:
1000 Mbit/s
SFP transceiver type:
Fiber optic
Power
Power consumption (typical):Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.
1.3 W
Technical details
Compliance certificates:
RoHS
Sustainability certificates:
RoHS
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
72 g
Height:The measurement of the product from head to foot or from base to top.
12 mm
Depth:The distance from the front to the back of something.
65 mm
Width:The measurement or extent of something from side to side.
14 mm
