Main product

Overview


Our Copper Small Form Pluggable (SFP) transceivers are high-performance, cost-effective modules compliant with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE802.3-2002 and IEEE802.3ab, supporting 1000Mbps data-rate up to 100 metres over unshielded twisted-pair category 5 cable.

The module supports 1000Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair.

The module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2 wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2 wire serial bus at address ACh.




At-a-glance


  • Fully metallic enclosure for low EMI

  • Hot-pluggable SFP footprint

  • Low power dissipation (1.05W typical)

  • TX Disable and RX Los/without Los function

  • Up to 1.25Gbps bi-directional data links




Reasons to buy

  • Fully metallic enclosure for low EMI
  • Hot-pluggable SFP footprint
  • Low power dissipation (1.05W typical)
  • TX Disable and RX Los/without Los function
  • Up to 1.25Gbps bi-directional data links

Specification

Technical Description: Cablenet CN-SFP-T-HP network transceiver module Copper 1000 Mbit/s
Features
Brand compatibility:What other brands this brand can be used with.
HP
Hot-swap:
Yes
Plug and Play:Indicates whether this product supports is "plug and play". Plug and play is hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.
Yes
Form factor:The shape or design of the product.
SFP
Product colour:
Metallic

Logistics data
Country of origin:Country where the device is made.
China

Performance
Copper ethernet cabling technology:
1000BASE
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3ab
Ethernet interface type:
1.25 Gigabit Ethernet
Ethernet LAN:An Ethernet LAN (Local Area Network) interface is present, for a wired conection via a cable.
Yes
Maximum transfer distance:The greatest distance over which the data/signal can be transferred.
100 m
SFP transceiver standard:
T
Multi-mode fiber (MMF) supported:
No
Single-mode fiber (SMF) supported:
No
Interface type:
SFP
Maximum data transfer rate:
1000 Mbit/s
SFP transceiver type:
Copper

Product details

CN-SFP-T-HP Cablenet 5056750320672

Cablenet CN-SFP-T-HP network transceiver module Copper 1000 Mbit/s

£23.99 and In stock

SKU: CN-SFP-T-HP

Cablenet CN-SFP-T-HP network transceiver module Copper 1000 Mbit/s

Quick Code: Q1870280 MPN: CN-SFP-T-HP
Best Seller
£19.99ex VAT

11 in stock
Quantity:
Buying in Bulk? get quantity discounts
Quantity Discounts Available
Buy 5 for £14.72 ex VAT each - SAVING £5.27 per unit
Buy 10 for £14.06 ex VAT each - SAVING £5.93 per unit

Key Features

  • Up to 1.25Gbps bi-directional data links
  • Hot-pluggable SFP footprint
  • TX Disable and RX Los/without Los function
  • Fully metallic enclosure for low EMI
  • Low power dissipation (1.05W typical)