Main product

Overview


The SFP transceivers are high-performance, cost-effective modules supporting a data-rate of 1.25Gbps with a transmission distance of up to 550m over 50/125µm optical fibre (300m over 62.5/125µm).

The transceiver consists of three sections: a VCSEL laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and a MCU control unit. All modules satisfy class I laser safety requirements.

The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472.

For further information, please refer to SFP MSA.




At-a-glance


  • 1.25Gbps SFP Optical Transceiver, 550m tx distance

  • 850nm VCSEL laser and PIN photodetector

  • Compliant with SFP MSA and SFF-8472 with LC duplex port

  • Data-rate of 1.25Gbps operation

  • Digital Diagnostic Monitoring: Internal Calibration or External Calibration




Reasons to buy

  • 1.25Gbps SFP Optical Transceiver, 550m tx distance
  • 850nm VCSEL laser and PIN photodetector
  • Compliant with SFP MSA and SFF-8472 with LC duplex port
  • Data-rate of 1.25Gbps operation
  • Digital Diagnostic Monitoring: Internal Calibration or External Calibration

Specification

Technical Description: Cablenet CN-SFP-1G-SX-CIS network transceiver module Fiber optic 1000 Mbit/s 850 nm
Features
Brand compatibility:What other brands this brand can be used with.
Cisco
Hot-swap:
Yes
Plug and Play:Indicates whether this product supports is "plug and play". Plug and play is hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.
Yes
Form factor:The shape or design of the product.
SFP
Product colour:
Metallic

Logistics data
Country of origin:Country where the device is made.
China

Performance
Rx wavelength (max):
860 nm
Rx wavelength (min):
770 nm
Tx wavelength (max):
860 nm
Tx wavelength (min):
830 nm
Wavelength:The distance over which a wave repeats itself. The wavelength determines the characteristics of the wave e.g. red light has a different wavelength to blue light.
850 nm
Maximum transfer distance:The greatest distance over which the data/signal can be transferred.
500 m
SFP transceiver standard:
SX
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
LC
Multi-mode fiber (MMF) supported:
Yes
Single-mode fiber (SMF) supported:
No
Interface type:
SFP
Maximum data transfer rate:
1000 Mbit/s
SFP transceiver type:
Fiber optic

Product details

CN-SFP-1G-SX-CIS Cablenet 5056750320580

Cablenet CN-SFP-1G-SX-CIS network transceiver module Fiber optic 1000 Mbit/s 850 nm

£16.99 and In stock

SKU: CN-SFP-1G-SX-CIS

Cablenet CN-SFP-1G-SX-CIS network transceiver module Fiber optic 1000 Mbit/s 850 nm

Quick Code: Q1869525 MPN: CN-SFP-1G-SX-CIS
Best Seller
£14.16ex VAT

14 in stock
Quantity:
Buying in Bulk? get quantity discounts
Quantity Discounts Available
Buy 5 for £8.62 ex VAT each - SAVING £5.54 per unit
Buy 10 for £7.93 ex VAT each - SAVING £6.23 per unit

Key Features

  • 1.25Gbps SFP Optical Transceiver, 550m tx distance
  • Data-rate of 1.25Gbps operation
  • 850nm VCSEL laser and PIN photodetector