Main product

Overview


This 850nm VCSEL 10Gigabit SFP+ transceiver is designed to transmit and receive optical data over 50/125µm or 62.5/125µm multimode optical fibre.

The SFP+ SR module electrical interface is compliant with SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential.

Data lines are internally AC coupled. The module provides differential termination and reduces differential to common mode conversion for quality signal termination and low EMI.

SFI typically operates over 200mm of improved FR4 material or up to 150mm of standard FR4 with one connector.




At-a-glance


  • 850nm VCSEL transmitter, PIN photo-detector

  • Electrical interface compliant with SFF-8431

  • Hot Pluggable

  • Maximum link length of 300m on 2000MHz/km MMF

  • Optical interface compliant with IEEE802.3ae




Reasons to buy

  • 850nm VCSEL transmitter, PIN photo-detector
  • Electrical interface compliant with SFF-8431
  • Hot Pluggable
  • Maximum link length of 300m on 2000MHz/km MMF
  • Optical interface compliant with IEEE802.3ae

Specification

Technical Description: Pack of 5 Cablenet CN-SFP-10G-SR-CIS network transceiver module Fiber optic 10000 Mbit/s SFP+ 850 nm
Features
Brand compatibility:What other brands this brand can be used with.
Cisco
Hot-swap:
Yes
Plug and Play:Indicates whether this product supports is "plug and play". Plug and play is hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.
Yes
Form factor:The shape or design of the product.
SFP+
Product colour:
Metallic

Logistics data
Country of origin:Country where the device is made.
China

Performance
Rx wavelength (max):
860 nm
Rx wavelength (min):
770 nm
Tx wavelength (max):
860 nm
Tx wavelength (min):
840 nm
Wavelength:The distance over which a wave repeats itself. The wavelength determines the characteristics of the wave e.g. red light has a different wavelength to blue light.
850 nm
Maximum transfer distance:The greatest distance over which the data/signal can be transferred.
300 m
SFP transceiver standard:
SR
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
LC
Multi-mode fiber (MMF) supported:
Yes
Single-mode fiber (SMF) supported:
No
Interface type:
SFP+
Maximum data transfer rate:
10000 Mbit/s
SFP transceiver type:
Fiber optic

Product details

CN-SFP-10G-SR-CIS-PackOF5Qty Cablenet 5056750320467

Pack of 5 Cablenet CN-SFP-10G-SR-CIS network transceiver module Fiber optic 10000 Mbit/s SFP+ 850 nm

£57.32 and In stock

SKU: CN-SFP-10G-SR-CIS-PackOF5Qty


Parent Product

CN-SFP-10G-SR-CIS Cablenet


MPN: CN-SFP-10G-SR-CIS

Pack of 5 Cablenet CN-SFP-10G-SR-CIS network transceiver module Fiber optic 10000 Mbit/s SFP+ 850 nm

Multiple Quantity Discount Pack

Please Note: This product pack contains 5 indevidual units. The price displayed is for 5 units.
Quick Code: Q2254939 MPN: CN-SFP-10G-SR-CIS-PackOF5Qty
£47.77ex VAT

2 in stock
Quantity:
Buying in Bulk? get quantity discounts