Main product

Overview


Industry-leading Integration of PoE Technology and Renewable Power System

PLANET’s newly-launched Renewable Energy Industrial 802.3at PoE Managed Ethernet Switch, BSP-360, is designed for deploying a surveillance or wireless network and remotely monitoring and managing the IP-based devices. Based on its green technology, the BSP-360 can be charged by the inexhaustible and natural source of energy, such as solar, wind and hydroelectric power to conserve energy so as to economically power these remote IP cameras and wireless APs, especially used for such expansive applications as dams, forests, deserts, national parks, nature/animal protection areas and highways.

PLANET NMS-360 Network Management Controller can centrally manage up to 512 BSP-360 units and 2,048 PLANET IP cameras via MQTT and ONVIF Protocols. (Please regularly check PLANET website for the latest compatibility list of managed devices.)


MPPT (Maximum Power Point Tracking) Charge Controller

An MPPT (Maximum Power Point Tracker) is an electronic DC to DC converter that optimizes the match between the PV solar panels and the battery bank or utility grid. They convert a higher voltage DC output from solar panels (and a few wind generators) to the lower voltage needed to charge the battery effectively.


Zero-Carbon and Stable Power Supply

The nickel-cadmium or lead-acid battery gets recharged by way of the BSP-360 where solar power is sourced. Thus, the BSP-360 will keep powering PD devices without the need of any cabling. Its zero-carbon feature is made possible as the energy the unit gets is renewable. Most importantly, the operation of outdoor wireless IP-based surveillance can be continued into the night as the battery is charged during the day.


Smart Battery Management

The BSP-360 features the following special power management functions:

- Current battery usage status by percentage
- Low voltage cut-off protection


Current Battery Usage Status

The administrator can remotely access the BSP-360 to know the power status of the battery and renewable energy, and the estimated time of power consumption.


Low Voltage Cut-Off Protection

If the remaining energy is too low to power the network, the system will automatically power off the device to make sure the system works normally, and an alert is then sent to the administrator at the same time.


Smart PoE PD Management including PLANET ONVIF IP carmera

As it is the managed PoE switch for surveillance, wireless and VoIP networks, the BSP-360 features the following special PoE management functions:

- PD alive check
- Scheduled power recycling
- PoE schedule
- PoE usage monitoring

ONVIF management functions:

- Supports PLANET ONVIF IP camera discovery
- A maximum of four PLANET ONVIF IP cameras can be powered by one BSP-360 switch.
- Supports IP camera snapshot function in the LAN.


Intelligent Powered Device Alive Check

The BSP-360 can be configured to monitor connected PD (Powered Device) status in real time via ping action. Once the PD stops working and responding, the BSP-360 will resume the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reducing administrator management burden.


Scheduled Power Recycling

The BSP-360 allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specific time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow.


PoE Schedule for Energy Saving

Under the trend of energy saving worldwide and contributing to environmental protection, the BSP-360 can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and budget. It also increases security by powering off PDs that should not be in use during non-business hours.


PoE Usage Monitoring and Intelligent LED Indicator for Real-time PoE Usage

Via the power usage chart in the web management interface, the BSP-360 enables the administrator to monitor the status of the power usage of the connected PDs in real time. Thus, it greatly enhances the management efficiency of the facilities. Moreover, the BSP-360 helps users to monitor the current status of PoE power usage easily and efficiently via its advanced LED indication. Called “PoE Power Usage”, the front panel of the BSP-360 has three LED indicators of different power usages.


User-friendly and Secure Management

For efficient management, the BSP-360 is equipped with web and SNMP management interfaces. With the built-in web-based management interface, the BSP-360 offers an easy-to-use, platform-independent management and configuration facility. By supporting the standard SNMP, the switch can be managed via any standard management software.




At-a-glance


  • 24V~45V DC wide power input

  • 5-port 10/100/1000BASE-T Gigabit RJ45 copper with 4-port IEEE 802.3at/af PoE injector function (Port 1 to Port 4)

  • 802.1d STP and IGMP Proxy

  • 8K MAC address table size

  • Auto detects powered device (PD)

  • Automatic address learning and address aging

  • Backward compatible with IEEE 802.3af Power over Ethernet

  • Battery Management

  • Battery type option: lead-acid battery

  • Circuit protection prevents power interference between ports

  • Complies with IEEE 802.3at Power over Ethernet Plus end-span PSE

  • Configuration upload/download through HTTP

  • Current battery usage status

  • DIN-rail and wall-mounted designs

  • DoS attack prevention

  • Easy diagnostic of the system operating status via LED indicator

  • Event message logging to remote syslog server

  • Features Store-and-Forward mode with wire-speed filtering and forwarding rates

  • Firmware upload/download via HTTP

  • Hardware-based 10/100Mbps (half/full duplex), 1000Mbps (full duplex), auto-negotiation and auto MDI/MDI-X

  • Hardware-based reset button for system reboot or reset to factory default

  • IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation

  • Industrial Case and Installation

  • Internet types: Dynamic IP, static IP, PPPoE, L2TP, PPTP

  • IP source guard prevents IP spoofing attacks

  • IP/MAC-based bandwidth control

  • IP30 aluminum case

  • IPv4 Web switch management

  • Low voltage cut-off protection: Send alert and cut off power when the battery is low

  • MAC filtering allows you to include or exclude computers and devices based on their MAC address

  • Management

  • MPPT (Maximum Power Point Tracking) Charge Controller

  • Network Time Protocol

  • Over-current and over-temperature protection

  • PD alive check

  • Per PoE port power limitation

  • Per port PoE function enable/disable

  • Physical Port

  • PLANET Smart Discovery Utility

  • PoE management

  • PoE port power feeding priority

  • PoE schedule

  • Port filtering allows which application can access the Internet

  • Power over Ethernet

  • Redundant power supply

  • Remote power feeding up to 100 meters

  • Reverse current protection to prevent the current circuits from flowing back to the PV panel

  • Reverse polarity protection (for battery and charging electrodes)

  • RJ45 type interface for basic management and setup

  • Router

  • Security

  • SNMP trap for Link Up and Link Down notification

  • SNMP v1, v2c

  • Static and DHCP for IP address assignment

  • Static and dynamic (RIP1 and 2) routing

  • Supports -10 to 60 degrees C operating temperature

  • Supports ESD 6KV DC Ethernet protection

  • Supports PLANET NMS-360 Network Management Controller

  • Supports PLANET ONVIF IP camera and snapshot function

  • Supports PoE power up to 30 watts for each PoE port

  • Supports Port Forwarding, DMZ, UPnP and Dynamic DNS for various networking applications

  • Switch Management Interface

  • Switching

  • System Maintenance

  • Total PoE power budget control

  • Up to 4 ports of IEEE 802.3af/802.3at devices powered

  • URL filtering allows you to control access to Internet websites in an URL list

  • USB type A female for setting file backup and restoration




Reasons to buy

  • 24V~45V DC wide power input
  • 5-port 10/100/1000BASE-T Gigabit RJ45 copper with 4-port IEEE 802.3at/af PoE injector function (Port 1 to Port 4)
  • 802.1d STP and IGMP Proxy
  • 8K MAC address table size
  • Auto detects powered device (PD)
  • Automatic address learning and address aging
  • Backward compatible with IEEE 802.3af Power over Ethernet
  • Battery Management
  • Battery type option: lead-acid battery
  • Circuit protection prevents power interference between ports
  • Complies with IEEE 802.3at Power over Ethernet Plus end-span PSE
  • Configuration upload/download through HTTP
  • Current battery usage status
  • DIN-rail and wall-mounted designs
  • DoS attack prevention
  • Easy diagnostic of the system operating status via LED indicator
  • Event message logging to remote syslog server
  • Features Store-and-Forward mode with wire-speed filtering and forwarding rates
  • Firmware upload/download via HTTP
  • Hardware-based 10/100Mbps (half/full duplex), 1000Mbps (full duplex), auto-negotiation and auto MDI/MDI-X
  • Hardware-based reset button for system reboot or reset to factory default
  • IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
  • Industrial Case and Installation
  • Internet types: Dynamic IP, static IP, PPPoE, L2TP, PPTP
  • IP source guard prevents IP spoofing attacks
  • IP/MAC-based bandwidth control
  • IP30 aluminum case
  • IPv4 Web switch management
  • Low voltage cut-off protection: Send alert and cut off power when the battery is low
  • MAC filtering allows you to include or exclude computers and devices based on their MAC address
  • Management
  • MPPT (Maximum Power Point Tracking) Charge Controller
  • Network Time Protocol
  • Over-current and over-temperature protection
  • PD alive check
  • Per PoE port power limitation
  • Per port PoE function enable/disable
  • Physical Port
  • PLANET Smart Discovery Utility
  • PoE management
  • PoE port power feeding priority
  • PoE schedule
  • Port filtering allows which application can access the Internet
  • Power over Ethernet
  • Redundant power supply
  • Remote power feeding up to 100 meters
  • Reverse current protection to prevent the current circuits from flowing back to the PV panel
  • Reverse polarity protection (for battery and charging electrodes)
  • RJ45 type interface for basic management and setup
  • Router
  • Security
  • SNMP trap for Link Up and Link Down notification
  • SNMP v1, v2c
  • Static and DHCP for IP address assignment
  • Static and dynamic (RIP1 and 2) routing
  • Supports -10 to 60 degrees C operating temperature
  • Supports ESD 6KV DC Ethernet protection
  • Supports PLANET NMS-360 Network Management Controller
  • Supports PLANET ONVIF IP camera and snapshot function
  • Supports PoE power up to 30 watts for each PoE port
  • Supports Port Forwarding, DMZ, UPnP and Dynamic DNS for various networking applications
  • Switch Management Interface
  • Switching
  • System Maintenance
  • Total PoE power budget control
  • Up to 4 ports of IEEE 802.3af/802.3at devices powered
  • URL filtering allows you to control access to Internet websites in an URL list
  • USB type A female for setting file backup and restoration

Specification

Technical Description: PLANET BSP-360 network switch Managed Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) Blue, White
Certificates
Certification:
FCC Part 15 Class A, CE

Certification
Certification:
FCC Part 15 Class A, CE

Data transmission
Store-and-forward:
Yes
Throughput:Rate at which data can be transferred.
5.95 Mpps
Switching capacity:The data transfer capacity of the switch per second.
10 Gbit/s
MAC address table:The MAC address is the 'Media Access Control Address'. It is a unique address given to a network interface controller (NIC) in a device. A MAC address table shows the addresses in a table format.
8000 entries

Design
DIN rail mounting:
Yes
International Protection (IP) code:The IP code classifies and rates the degree of protection provided against the intrusion (including body parts such as hands and fingers), dust, accidental contact, and water by mechanical casings and electrical enclosures. It is published by the International Electrotechnical Commission (IEC). The digits (characteristic numerals) indicate conformity with the conditions summarized in the tables below. Where there is no protection rating with regard to one of the criteria, the digit is replaced with the letter X. an electrical socket rated IP22 is protected against insertion of fingers and will not be damaged or become unsafe during a specified test in which it is exposed to vertically or nearly vertically dripping water. Another example is the Sony Xperia Z Ultra, one of the first cellular phones to be IP-rated; it is rated at IP58 and marketed as "dust resistant" and can be "immersed in 1.5 meter of freshwater for up to 30 minutes".
IP30
Wall mountable:The product can be mounted on (attached to ) a wall.
Yes
LED indicators:
Activity, Fault, Link, Power, System
Reset button:
Yes
Product colour:
Blue, White

Logistics data
Harmonized System (HS) code:
85176990

Management features
Web-based management:Using a website/web application to manage something.
Yes
Switch type:What switch device has, managed or unmanaged.
Managed

Network
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Yes
Auto-negotiation:
Yes
Flow control support:
Yes
Modulation:Modulation is the process of varying one or more properties of a periodic waveform, called the carrier signal (High Frequency Signal), with a modulating signal which typically contains information to be transmitted. The aim of digital modulation is to transfer a digital bit stream over an analog bandpass channel, for example over the public switched telephone network (where a bandpass filter limits the frequency range to between 300 and 3400 Hz), or over a limited radio frequency band. The aim of analog modulation is to transfer an analog baseband (or lowpass) signal, for example an audio signal or TV signal, over an analog bandpass channel at a different frequency, for example over a limited radio frequency band or a cable TV network channel.
PWM
Spanning tree protocol:
Yes
Full duplex:A full-duplex system allows communication in both directions, and unlike half-duplex, allows this to happen simultaneously.
Yes
Half duplex:
Yes
10G support:The product can use Oracle 10G, which is a database management system introduced in 2003.
No
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.1D, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3u, IEEE 802.3x

Networking
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Yes
Auto-negotiation:
Yes
Flow control support:
Yes
Modulation:Modulation is the process of varying one or more properties of a periodic waveform, called the carrier signal (High Frequency Signal), with a modulating signal which typically contains information to be transmitted. The aim of digital modulation is to transfer a digital bit stream over an analog bandpass channel, for example over the public switched telephone network (where a bandpass filter limits the frequency range to between 300 and 3400 Hz), or over a limited radio frequency band. The aim of analog modulation is to transfer an analog baseband (or lowpass) signal, for example an audio signal or TV signal, over an analog bandpass channel at a different frequency, for example over a limited radio frequency band or a cable TV network channel.
PWM
Spanning tree protocol:
Yes
Full duplex:A full-duplex system allows communication in both directions, and unlike half-duplex, allows this to happen simultaneously.
Yes
Half duplex:
Yes
10G support:The product can use Oracle 10G, which is a database management system introduced in 2003.
No
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.1D, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3u, IEEE 802.3x

Operational conditions
Heat dissipation:The heat generated by the power supply.
461.5 BTU/h
Storage relative humidity (H-H):
5 - 95%
Operating relative humidity (H-H):
5 - 95%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-10 - 70 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
-10 - 60 °C

Performance
Buffer size:The buffer is a temporary memory area in which data is stored while it is being processed or transferred, especially one used while streaming video or downloading audio. The buffer size is usually measured in MB (megabytes) or KB (kilobytes).
512 KB
Firmware upgradeable:
Yes

Ports & interfaces
USB 2.0 ports quantity:Number of USB 2.0 ports (connecting interfaces) in the device. USB 2.0 was released in April 2000 (now called "Hi-Speed"), adding higher maximum signaling rate of 480 Mbit/s (effective throughput up to 35 MB/s or 280 Mbit/s), USB 2.0 ports are usually black.
1
Basic switching RJ-45 Ethernet ports type:The type/category of basic switching RJ-45 Ethernet ports (sockets).
Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity:The number of basic switching RJ-45 Ethernet ports (sockets).
5

Power
Power protection features:Features that protect the device against power problems e.g. overload.
Short circuit
Power consumption (typical):Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.
135.36 W
Output current:
1 A
Output voltage:
24 V
Input voltage:The voltage (V) which is required to power the product.
60 V
Input current:
6 A
DC input voltage:
24 V

Power over Ethernet (PoE)
Total Power over Ethernet (PoE) budget:
120 W
Power over Ethernet (PoE) power per port:
30 W
Power over Ethernet (PoE) ports quantity:
4
Power over Ethernet (PoE):The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.
Yes

Security
MAC address filtering:Security access control method whereby the 48-bit address assigned to each network card is used to determine access to the network. MAC addresses are uniquely assigned to each card, so using MAC filtering on a network permits and denies network access to specific devices through the use of blacklists and whitelists.
Yes
Security algorithms:Security algorithms are used to provide authentication, cipher key generation, integrity and radio link privacy to users on mobile networks. The security algorithms supported are the ones that can be used with this product.
SNMP
IGMP snooping:
Yes
DHCP features:
DHCP server

Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
1.03 kg
Height:The measurement of the product from head to foot or from base to top.
152 mm
Depth:The distance from the front to the back of something.
107 mm
Width:The measurement or extent of something from side to side.
89 mm

Product details

BSP-360 Planet 4711605282376

PLANET BSP-360 network switch Managed Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) Blue, White

£478.00 and In stock

SKU: BSP-360

PLANET BSP-360 network switch Managed Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) Blue, White

Quick Code: Q1618978 MPN: BSP-360
£398.33ex VAT

10 in stock
Quantity:
In Stock

Key Features

  • Physical Port
  • RJ45 type interface for basic management and setup
  • Power over Ethernet
  • Auto detects powered device (PD)
  • Remote power feeding up to 100 meters
  • PoE management