Main product

Overview


Gigabit Small Form-Factor Pluggable Modules
The Allied Telesis SP Series delivers flexible, full-duplex Ethernet connectivity. These hot-swappable fiber and copper interfaces simply plug into the SFP slot on all SFP-compatible devices. Configuration can be optimized to meet a wide variety of distance and service requirements.

Compatibility
Allied Telesis SP Series Gigabit Small Form-Factor Pluggables (SFPs) are supported on all Allied Telesis devices with SFP uplink connections.

SP Series SFPs are Multi-Sourcing Agreement (MSA)-compliant, and fully adhere to industry standard networking regulations. This allows the SP Series to be used with other MSA-compliant platforms that support SFP uplink connections.

For Cisco compatibility please refer to the “SFP Compatibility Flyer”.

Options
SP Series SFPs offer short-haul,
long-haul and Bi-Directional (BiDi) solutions. This flexibility allows network managers to easily extend network distance and bandwidth.

Using an SFP BiDi transceiver can upgrade transmission capacity on a typical network—without installing new fibers—by utilizing a single fiber for both the send and receive signals.

Multiple temperature ranges
Different network environments call for a variety of temperature ranges. The SP Series is available in standard (0-70°C), industrial (-40 to 85°C), and extended (-40 to 105°C) temperature variants.




Reasons to buy

  • Compact size
  • Fiber and copper solutions
  • Flexible architecture
  • MSA-compliant
  • Plug and Play for ease of use
  • Self-locking mechanism

Specification

Technical Description: Allied Telesis SPLX10/E network transceiver module Fiber optic 1000 Mbit/s SFP 1310 nm
Features
Hot-swap:
Yes
Plug and Play:Indicates whether this product supports is "plug and play". Plug and play is hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.
Yes
Housing material:
Metal
Product colour:
Silver

Operational conditions
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
-40 - 105 °C

Other features
RX sensitivity:
-21 dB

Packaging content
Quantity per pack:The amount in each pack.
1 pc(s)

Performance
Tx power (max):
-3 dBmW
Tx power (min):
-9 dBmW
Wavelength:The distance over which a wave repeats itself. The wavelength determines the characteristics of the wave e.g. red light has a different wavelength to blue light.
1310 nm
Maximum transfer distance:The greatest distance over which the data/signal can be transferred.
10000 m
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
LC
Single-mode fiber (SMF) supported:
Yes
Interface type:
SFP
Maximum data transfer rate:
1000 Mbit/s
SFP transceiver type:
Fiber optic

Product details

AT-SPLX10/E Allied Telesis 0767035212289

Allied Telesis SPLX10/E network transceiver module Fiber optic 1000 Mbit/s SFP 1310 nm

£212.99 and In stock

SKU: AT-SPLX10/E

Allied Telesis SPLX10/E network transceiver module Fiber optic 1000 Mbit/s SFP 1310 nm

Quick Code: Q408856 MPN: AT-SPLX10/E
Best Seller
£177.49ex VAT

5 in stock
Quantity:
Buying in Bulk? get quantity discounts
delivery_truck_speedExpected Delivery Monday 3rd August

Key Features

  • Fiber and copper solutions
  • Compact size
  • Flexible architecture
  • Plug and Play for ease of use
  • Self-locking mechanism
  • MSA-compliant