Audio
Frequency range:The lowest and the hightest frequencies that can be inputted/produced.
20 - 20000 Hz
RMS power output per channel (8 Ohm):
30 W
RMS power output per channel (4 Ohm):
50 W
Total Harmonic Distortion (THD):Total harmonic distortion is a measure of non-linear harmonic\n\ndistortion and is given in %. Non-linear harmonic distortions are\n\nsignals which were not present in the original before the signal was\n\nconverted by the headphones. These unwanted signals are caused by the\n\ndiaphragm, whose movements do not precisely move in time with the\n\nelectric signals that cause it to move. Unfortunately, this is a\n\nfeature of all electroacoustic transducers. Although it cannot be\n\ncompletely eliminated, suitable steps can be taken to minimise it.\n\nHowever, the user is not interested in why this distortion takes place\n\nbut in how great the level of distortion must be for it to become\n\nperceptible. According to the findings of several research projects, a\n\ntotal harmonic distortion of 1% in the frequency range of 100 to 2000\n\nHz is imperceptible. Below 100 Hz, the perceptibility threshold lies\n\nat 10%.
0.3%
Amplifier class:An electronic amplifier, amplifier, or (informally) amp is an electronic device that increases the power of a signal. It does this by taking energy from a power supply and controlling the output to match the input signal shape but with a larger amplitude. Power amplifier circuits (output stages) are classified as A, B, A/B and C for analog designs, and class D and E for switching designs based on the proportion of each input cycle (conduction angle), during which an amplifying device is passing current.
D
Peak power per channel:The maximum power (usually measued in watts) that can be transmitted through a channel.
50 W
General
Type:Characteristics of the device.
Audio Amplifiers
Indication
Logistics data
Export Control Classification Number (ECCN):
EAR99
Harmonized System (HS) code:
8518402000
Operational conditions
Operating altitude:
0 - 3000 m
Operating relative humidity (H-H):
0 - 95%
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 40 °C
Packaging content
Packaging data
Package weight:Weight of the packaged product.
700 g
Package height:The distance from the top to the bottom of the packaging.
127 mm
Package depth:The distance from the front to the back of the packaging.
254 mm
Package width:The distance from one side of the packaging to the other.
177.8 mm
Ports & interfaces
Ethernet LAN (RJ-45) ports:Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device. Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.
5
Speakers connectivity type:The type of connection used for the speakers e.g. RCA connector.
RJ-45
Power
Power consumption (typical):Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.
30 W
Technical details
Sustainability compliance:
Country of origin:Country where the device is made.
United States
Channels quantity:The number of channels the device has. There can be an individual input or output for each channel.
4 channels
Compliance certificates:
CE, Federal Communications Commission (FCC), RoHS
Cooling type:The method used to cool the device or to cool the air around the device.
Passive
Connectivity technology:
Wired
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
700 g
Height:The measurement of the product from head to foot or from base to top.
30 mm
Depth:The distance from the front to the back of something.
120 mm
Width:The measurement or extent of something from side to side.
195 mm
