Main product

Overview


Cat.6A S/FTP network cable with support for bandwidth up to 500MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.
Cat.6A cable, shielded with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6A cables meet the requirements of 10 Gigabit Ethernet (10GBaseT) with an operating frequency of up to 500MHz. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions.
Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.
Available colours: Black, Blue, Grey, Red, White, Green, Yellow.




Reasons to buy

  • Cat.6A S/FTP PIMF, LSZH
  • Gold plated pins for better conductivity and elimination of signal loss
  • Integrated snagless connector for latch protection
  • Twisted Pair Patch Cable with RJ45 connectors

Specification

Technical Description: Lindy 47183 networking cable Black 10 m Cat6a S/FTP (S-STP)
Certificates
Certification:
RoHS, REACH, UL

Certification
Certification:
RoHS, REACH, UL

Features
Plug and Play:Indicates whether this product supports is "plug and play". Plug and play is hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.
Yes
Bend radius (min):
7.2 cm
Frequency:
500 MHz
Data transfer rate:Rate at which data can be transferred, usually measured in units per second. May vary with network configurations.
1000 Mbit/s
AWG wire size:
27
Cabling technology:Type of cable technology performance.
10/100/1000Base-T(X)
Cable class:
E
Conductor material:
Copper
Jacket material:
Low smoke zero halogen (LSZH)
Connector shield material:
Aluminium
Connector shielding:
Yes
Connector contacts plating:What the connector contacts are covered with (layer on top).
Nickel/Gold
Connector 1 gender:
Male
Connector 2 gender:
Male
Connector 2:This is the second connector in the device.
RJ-45
Connector 1:This is the first connector in the device.
RJ-45
Product colour:
Black
Cable shielding:The protective layer for the cable, typically made of plastic.
S/FTP (S-STP)
Cable standard:The category of the cable, which is determined by performance characteristics and test requirements.
Cat6a
Cable length:How long the cable is.
10 m

General
Type:Characteristics of the device.
Networking Cables

Logistics data
Harmonized System (HS) code:
84733080

Operational conditions
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-20 - 75 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
-10 - 60 °C

Packaging content
Quantity per pack:The amount in each pack.
1 pc(s)

Packaging data
Package type:The type of product package e.g. box.
Polybag

Weight & dimensions
Connector 1 dimensions (WxDxH):
11.6 x 21.5 x 8.3 mm
Connector 2 dimensions (WxDxH):
11.6 x 21.5 x 8.3 mm
Outer diameter:
6 mm

Product details

47183 Lindy 4002888471831

Lindy 47183 networking cable Black 10 m Cat6a S/FTP (S-STP)

£19.00 and

SKU: 47183

Lindy 47183 networking cable Black 10 m Cat6a S/FTP (S-STP)

Quick Code: Q1473812 MPN: 47183
£15.83ex VAT

Out of Stock

Key Features

  • Twisted Pair Patch Cable with RJ45 connectors
  • Cat.6A S/FTP PIMF, LSZH
  • Integrated snagless connector for latch protection