Overview



The Lindy Fibre Optic HDMI® 4K60 Dongle Extender is an effective, reliable solution for extending UHDCloseUltra High Definition (UHD) is the resolution 3840x2160 pixels. What this means is that there are more pixels per inch (PPI) in a UHD display than a FHD (Full High Definition 1920x1080) display. This gives a higher resolution display HDMI® transmissions over incredible distances up to 300m using one simplex LC OM3 or OM4 multi-mode (50/125µm) fibre optic cable.

The extender can transmit 3840x2160@60Hz 4:4:4 8bit signals up to 300m with a OM3 or OM4 cable using smart methods of compression which decompresses the video at the receiver, allowing for distribution of visually lossless UltraHD content. With HDR (High Dynamic Range), HLG and Dolby Vision support, content can be seen enhanced contrast, and a much wider colour gamut, perfect for a true home cinema experience or eye-catching digital signage in retail settings. HDCP 2.2 compatibility allows protected 4K content, including Blu-Ray movies, TV shows & streaming services to be enjoyed without issue.

Support for lossless audio formats including Dolby Atmos & Dolby TrueHD adds powerful multi-channel sound to video content, providing an enhanced experience and sense of realism to the viewer.

The use of cost-effective LC multi-mode fibre optic cabling allows for the transmission of high bandwidth audio and video signals over incredible distances, far greater than is achievable with traditional copper-based extension systems. Fibre optic cables are also completely immune to any electromagnetic and radio frequency interference which makes this extender an ideal solution for installations within environments susceptible to high interference such as medical, aerospace and manufacturing facilities. The compact size and flexibility also allow for easy installation under floors and within wall partitions.

The low power requirement and super slim form factor provide invaluable flexibility when incorporating this extender into new and existing installations. The enclosed HDMI® extension cables allows each module to be placed in a convenient location near the source and display without blocking ports and creating a discreet installation. The transmitter unit can be connected and powered by a variety of HDMI® source and devices while the receiver needs to be powered via the USB Micro-B port connecting it to a 5V USB charger or any powered USB port.




Reasons to buy


  • Experience an expanded range of contrasts and colours with HDR (High Dynamic Range)
  • Extend HDMI® signals up to 300m using a single simplex LC OM3 or OM4 multi-mode cable
  • Supports lossless HDMI® audio formats including Dolby Atmos & DTS-X
  • Supports UHD resolutions up to 4K@60Hz 4:4:4 8Bit

Specification


Technical Description: Lindy 300m AV Extenders - Dark grey

Features
Product colour:
Dark Grey
Bandwidth:Bandwidth is the difference between the upper and lower frequencies in a continuous set of frequencies. It is typically measured in Hertz (Hz). A key characteristic of bandwidth is that any band of a given width can carry the same amount of information, regardless of where that band is located in the frequency spectrum. For example, a 3 kHz band can carry a telephone conversation whether that band is at baseband (as in a POTS telephone line) or modulated to some higher frequency.
18 Gbit/s
Colour depth:
8 bit
Consumer Electronics Control (CEC) support:
Yes
HDCP:High-bandwidth Digital Content Protection (HDCP) is a form of digital copy protection to prevent copying of digital audio and video content as it travels across connections.
Yes
HDCP version:
2.2
Material:The material from which a thing is or can be made e.g. wood, plastic.
Aluminium
Extended display identification data (EDID):
Yes
Fiber optic wavelengths supported:
850 nm
Maximum refresh rate:
60 Hz
High Dynamic Range (HDR) supported:
Yes
Maximum transfer distance:The greatest distance over which the data/signal can be transferred.
300 m
Maximum resolution:The maximum number of pixels that can be displayed in the image. It is usually quoted as width × height,: for example, "1024 × 768" means the width is 1024 pixels and the height is 768 pixels.
3840 x 2160 pixels
Type:Characteristics of the device.
AV transmitter & receiver

Operational conditions
Operating relative humidity (H-H):
20 - 90%
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 40 °C
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-20 - 60 °C

Packaging content
Manual:
Yes
Cables included:
HDMI, USB Type-A to Micro USB Type-B

Packaging data
Package type:The type of product package e.g. box.
Box
Package weight:Weight of the packaged product.
900 g
Quantity per pack:The amount in each pack.
2 pc(s)

Ports & interfaces
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
LC
HDMI in:Port (socket) for HDMI input.
1
Number of HDMI outputs:
1
Connectivity technology:
Wired

Power
Power consumption (receiver) (max):
0.2 W
Power consumption (transmitter) (max):
0.9 W
Power source type:What the power source is.
USB

Technical details
Compliance certificates:
CE, Federal Communications Commission (FCC), REACH, RoHS, UKCA
Warranty period:
2 year(s)

Weight & dimensions
Transmitter weight:
700 g
Transmitter dimensions (WxDxH):
45 x 20 x 12 mm
Receiver weight:
700 g
Receiver dimensions (WxDxH):
45 x 20 x 12 mm


Product details


38392 Lindy 4002888383929

Lindy 300m AV Extenders - Dark grey

£673.99 and In stock

SKU38392

Lindy 300m AV Extenders - Dark grey

Quick Code: Q2822748 MPN: 38392
£561.66ex VAT

delivery_truck_speedOrder Now, and get it tomorrow, Friday 31st July