Battery
Battery recharge time:Approximate time required to recharge the battery from completely empty to completely full
2 h
Talk time:The total time a battery can power a device for calls. As the device drains the battery during a call, the talktime left in the battery is diminished until the device is turned off or the battery recharged. The longer the talktime the less frequently you will need to recharge. Talktime, expressed in hours and minutes, is much shorter than standby time because transmission requires more power.
25 h
Battery capacity:A measure of the charge stored by the battery. Determined by the mass of active material contained in the battery.
420 mAh
Input current (earpieces):
2 A
Input voltage (charging case):
5 V
Input voltage (earpieces):
3.7 V
Battery type:Description of battery supplied with the product, such battery form factor (e.g. AA/AAA).
Built-in battery
Certificates
Compliance certificates:
CE, Federal Communications Commission (FCC), REACH, RoHS
Certification
Compliance certificates:
CE, Federal Communications Commission (FCC), REACH, RoHS
Headphones
Total Harmonic Distortion (THD):Total harmonic distortion is a measure of non-linear harmonic\n\ndistortion and is given in %. Non-linear harmonic distortions are\n\nsignals which were not present in the original before the signal was\n\nconverted by the headphones. These unwanted signals are caused by the\n\ndiaphragm, whose movements do not precisely move in time with the\n\nelectric signals that cause it to move. Unfortunately, this is a\n\nfeature of all electroacoustic transducers. Although it cannot be\n\ncompletely eliminated, suitable steps can be taken to minimise it.\n\nHowever, the user is not interested in why this distortion takes place\n\nbut in how great the level of distortion must be for it to become\n\nperceptible. According to the findings of several research projects, a\n\ntotal harmonic distortion of 1% in the frequency range of 100 to 2000\n\nHz is imperceptible. Below 100 Hz, the perceptibility threshold lies\n\nat 10%.
0.1%
Headphone sensitivity:
115 dB
Impedance:The effective resistance of an electric circuit or component to alternating current, arising from the combined effects of ohmic resistance and reactance.
32 O
Headphone frequency:The range of frequencies (low to high sounds) that the headphones can produce.
20 - 20000 Hz
Ear coupling:Ear coupling describes the way in which headphones or earphones stay attached to, or inside, the ear. There are three common types of ear coupling: circumaural, supra-aural and intra-aural. Circumaural headphones enclose your ears with large pads that suppress external noise. Supra-aural headphones are typically more lightweight and sit on top of the ears with small pads. Intra-aural headphones come in two basic designs and neither style sits on the head itself. The first are ear buds, which sit just outside of the ear canal, on top of your ear lobes. The second type is actually inserted directly into the ear canal and offers some external noise suppression.
Supraaural
Microphone
Microphone frequency:The range of frequencies (low to high sounds) that the microphone can pick up (detect).
20 - 20000 Hz
Operational conditions
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-10 - 50 °C
Operating relative humidity (H-H):
25 - 70%
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
-10 - 50 °C
Packaging content
Quantity:The number of products there are.
1
Quick start guide:Instructions, either online, as a computer program or in paper form, to allow you to set up and start using the product quickly.
Audio adapters included:
USB
Performance
Certification:
CE, FCC, RoHS, REACH & California Proposition 65
Housing material:
Plastic, Acrylonitrile butadiene styrene (ABS)
Cable length:How long the cable is.
1.95 m
Control type:The way in which the device is controlled.
Buttons, Lever
Control unit type:
In-line control unit
Headset type:A headset is headphones combined with a microphone, or one headphone with a microphone. Headsets provide the equivalent functionality of a telephone handset but with hands-free operation. Types of headsets include single earpiece (monaural) and double earpiece.
Binaural
Recommended usage:What the product should be used for, and how it should be used (e.g. ambient temperature).
Office/Call center
Wearing style:The way in which the device is worn.
Head-band
Product type:The sub-category of the product.
Headset
Ports & interfaces
Bluetooth profiles:
SBC, AAC, APTX, APTX-Adaptive, APTX-HD
Bluetooth version:The type of bluetooth technology in the product e.g. Bluetooth Smart (v4.0).
5.2
Bluetooth:Bluetooth is a low-power radio technology developed to replace the cables and wires currently used to link or connect electronic devices such as personal computers, printers, and a wide variety of handheld devices including mobile phones. Because it uses radio-wave connectivity, a Bluetooth-enabled device has a constant, established connection to whatever browser it uses. This saves the user the trouble of logging on to check for emails or news updates, for example.
USB connectivity:The product has USB connector.
Connectivity technology:
Wired
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
350 g
Height:The measurement of the product from head to foot or from base to top.
69 mm
Depth:The distance from the front to the back of something.
186.5 mm
Width:The measurement or extent of something from side to side.
187.5 mm
