Design
Certification:
CE, FCC, VCCI, IEC62471-1, EN60950-1, IEC60950-1, EN55022, EN 55022, EN 301 489-1 V1.9.2, EN 301 489-17 V2.1.1, EN 300 328 V1.7.1
RoHS compliance:The Restriction of Hazardous Substances (RoHS) Directive aims to restrict certain dangerous substances commonly used in electrical and electronic equipment. Any RoHS compliant product is tested for the presence of Lead (Pb), Cadmium (Cd), Mercury (Hg), Hexavalent chromium (Hex-Cr), Polybrominated biphenyls (PBB), and Polybrominated diphenyl ethers (PBDE). PBB and PBDE are flame retardants used in several plastics. For Cadmium and Hexavalent chromium, there must be less than 0.01% of the substance by weight at raw homogeneous materials level. For Lead, PBB, and PBDE, there must be no more than 0.1% of the material, when calculated by weight at raw homogeneous materials. Any RoHS compliant component must have 100 ppm or less of mercury and the mercury must not have been intentionally added to the component. In the EU, some military and medical equipment are exempt from RoHS compliance.
International Protection (IP) code:The IP code classifies and rates the degree of protection provided against the intrusion (including body parts such as hands and fingers), dust, accidental contact, and water by mechanical casings and electrical enclosures. It is published by the International Electrotechnical Commission (IEC). The digits (characteristic numerals) indicate conformity with the conditions summarized in the tables below. Where there is no protection rating with regard to one of the criteria, the digit is replaced with the letter X. an electrical socket rated IP22 is protected against insertion of fingers and will not be damaged or become unsafe during a specified test in which it is exposed to vertically or nearly vertically dripping water. Another example is the Sony Xperia Z Ultra, one of the first cellular phones to be IP-rated; it is rated at IP58 and marketed as "dust resistant" and can be "immersed in 1.5 meter of freshwater for up to 30 minutes".
IP42
Housing material:
Acrylonitrile butadiene styrene (ABS)
Type:Characteristics of the device.
Handheld bar code reader
Colour of product:The colour e.g. red, blue, green, black, white.
White
Operational conditions
Operating relative humidity (H-H):
20 - 85%
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 50 °C
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-20 - 60 °C
Packaging content
Performance
Processor frequency:The clock rate is the fundamental rate in cycles per second (measured in hertz) at which a computer performs its most basic operations such as adding two numbers. There are more factors, like internal memory size, that influence a computer's actual response time.
96 MHz
Internal memory:The amount of memory, usually measured in bytes (e.g. MB, GB), which is installed in the system's hardware.
1 MB
Ports & interfaces
Bluetooth version:The type of bluetooth technology in the product e.g. Bluetooth Smart (v4.0).
2.1
Interface:Interface ports to connect pieces of equipment. USB (Universal Serial Bus) has become the most popular wired interface to connect peripherals. USB 2.0 supports speeds up to 480 Mbit/s (USB 1: 12 Mbit/s). The interface FireWire is also known as the IEEE 1394 standard. Enhanced IDE (EIDE)is sometimes referred to as Fast ATA, Fast IDE or ATA-2.
Bluetooth
Connectivity technology:
Wireless
Power
Battery life:The amount of time that the battery will last for.
25 h
Battery voltage:The voltage (V) of the battery.
3.7 V
Battery capacity:A measure of the charge stored by the battery. Determined by the mass of active material contained in the battery.
600 mAh
Number of batteries supported:The number of batteries that can be used with the product.
1
Battery technology:The type of battery in the device, e.g. nickel–cadmium (NiCd).
Lithium Polymer (LiPo)
Power source type:What the power source is.
Battery
Scanning
Yaw reading angle:
-65 - 65°
Pitch reading angle:
-50 - 50°
Tilt reading angle:
-25 - 25°
2D (matrix & stacked) barcodes supported:The product can read matrix (2D) barcordes.
Not supported
Linear (1D) barcodes supported:The product can read linear (1D) barcordes.
Codabar,Code 11,Code 128,Code 39,Code 93,EAN-13,EAN-8,GS1-128 (UCC/EAN-128),JAN,MSI,Plessey,S-Code,Telepen,Trioptic,U.P.C.
Sensor type:A sensor is a convertor than measures a physical quality (light, temperature etc.) and displays this electronically on a device.
CCD
Scanner type:A scanner is a device that optically scans images, printed text, handwriting, or an object, and converts it to a digital image. Common examples found in offices are variations of the desktop (or flatbed) scanner where the document is placed on a glass window for scanning. There are different types of scanners e.g. flatbed, pen, sheet-feed.
1D
Optical sensor resolution:
1500 pixels
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
53 g
Height:The measurement of the product from head to foot or from base to top.
83 mm
Depth:The distance from the front to the back of something.
21.5 mm
Width:The measurement or extent of something from side to side.
36 mm
